Table of Contents
Advertisement
How to use
Low battery
- An announcement will be made once every 2 minutes.
(Speech:Battery very low, please charge now)
- If the battery is not charged, the headset will turn off.
Answering a call / Ending a call
- Briefly press the CALL button.
Last number redial*
- Press and hold the CALL button for 1 second to activate "Last Number
Redial".
Making a call
- If you make a call from the handset, the call will (subject to phone settings)
automatically transfer to the headset. If the call is not automatically
transferred, you can manually transfer the call by briefly pressing the CALL
button on the headset/cradle. (Headset and handset must be paired).
Voice dialing*
- Briefly press the CALL button to activate "Voice Command".
NOTE: If the handset does not support Voice Dialing, it is possible that performing
this action will activate Last Number Redial.
Transferring a call*
- While on a call on your handset, briefly press the CALL button on the headset
to transfer the audio to the headset. And to transfer a call from the headset to
handset, press and hold VOLUME UP button for 3 seconds.
Call waiting*
- Answer a second call without hanging up the first call by pressing the
CALL button for 1 second (you will hear a beep). Press the CALL button
for 1second to return to the original call.
- Briefly press the CALL button to terminate the active call or both calls at
once. (subject to handset's support)
Call Reject*
- Press the CALL button for 1second when the handset rings.
* Calling instructions apply to the headset AND the cradle (when the headset is
attached).
Using HBM-810 as a Hands Free Car Kit
- To use the HBM-810 as a Hands Free Car Kit, attach the headset to the
Cradle.
- When the headset is attached to the Hands-free Car Kit, the headset CALL
button is deactivated, and will not work.
8
- Once the headset is attached to the cradle, all audio will be played through
the cradle.
- Use the CALL button on the cradle to activate all calling features.
Auto reconnect
- If the HBM-810 is turned off (either accidentally or intentionally) while
connected to a handset, the headset and handset will disconnect.The
headset and handset will automatically reconnect when the HBM-810 is
turned back on (provided that both devices are within the required range of
33 feet 10 meters).
[ Out of range ]
- When your handset and HBM-810 are separated by a range of 33 feet (10
meters) or more, the headset and handset will disconnect. When the handset
and HBM-810 are within the required range again, the HBM-810 will
automatically reconnect to the handset.
- If the headset and handset do not automatically reconnect when they are
back within the required range, briefly press the Call button on the HBM-810
to reconnect manually.
Music Play (A2DP)
The HBM-810 supports music streaming (A2DP).
When you play music from your mobile phone it will automatically transfer to your
headset or cradle. Music will automatically pause when you have an incoming call.
When the call is ended the music will start playing again.
Controlling your music is only possible from your handset.
How to use
9
Advertisement
Table of Contents
