HP f870x User Manual page 41

- To disable this function, in the vibration detection recording,
press any key to wake up the screen, and resume to normal loop
recording; or when the car engineer is started again, it will be
back to normal loop recording.
Note:
Motion Detection
1. When
events taken by front camera only.
2. If battery in a fully charged condition
minutes video in
storage capacity will decrease gradually. This is a normal phenomenon for the
battery.
3. The video files taken in Motion Detection mode will be saved in normal recording
folder.
4. The video files taken in Vibration Detection mode will be saved in Event recording
folder, which will not be overwritten by normal video files.
Vibration Detection
or
Motion Detection
triggers, the camcorder records
and Wi-Fi is off, it can record about 30
mode. As the camcorder is used, the battery
40