Advertisement
1. Individual
Stereo Speaker
1
Power on and change mode
to either BT (Blue LED) or
2
AUX
DC
Insert a cable into the AUX
port for wired connectoin.
The LED will light up yellow.
3
If selecting BT pair your
device to Damson
S-Cube. Function mode
should be set to Circle
2. Multi Speaker
1
2
Select a primary speaker to
Bring the additional speakers close to the primary speaker
connect to your device to
and press and hold the JSN Pairing button for 3 seconds
S-Cube. Power on additional
on both speakers at the same time. Speakers are now
speakers and change
function to JetStreamNet
mode (light blue LED).
3. S-Series Surround
1
2
Power
Mute
XBASS
Power On the
Change the mode
S-Woofer with remote
on the S-Cubes to
control.
JetStreamNet (light blue).
S-Cube has three primary functions:
3 sec.
3 sec.
DC
DC
Speaker 1
Speaker 2
connected. Repeat for up to 8 speakers.
3
3 sec.
DC
On the remote control
press and hold the Wireless
button for 3 seconds.
Pairing will complete.
3
DC
Change the output of each speaker. Select Triangle for
Stereo left channel and Square for Stereo Right channel,
or circle on each device if you wish to play stereo on each
speaker.
4
5
On the left surround
On the right surround
speaker change the output
speaker change the output
switch to
triangle.
switch to
square.
Advertisement
