Advertisement
1
Unpack all contents
including power supplies.
5
Position the Soundbar
in front of the display
(TV/Projector),
connect power cable.
10
The system will now power up and configure itself.
The Subwoofer logo will turn blue, the Soundbar
logo will light up red and the S-Cubes logo will
display light blue.
User Guide for S-Series Home Cinema
2
Insert batteries
into Remote Control.
6
Couple the Dolby Atmos
speaker onto the soundbar,
it will snap into place.
Please note: On initial set up it is recommended to connect the power
supply of the subwoofer last as this provides auto-power upon initial
setup. If the subwoofer is powered up before the other speakers are
connected you will need to power off the subwoofer either by removing
the power cable or pressing the power button on the remote control
until the LED turns off, then power on again by remote control.
3
DC
Select a location for the first S-Cube surround
speaker, connect power cable. For left surround
move switch on S-Cube to Triangle
surround select square
7
HDMI
INPUT 1
Insert the HDMI sources
into the Subwoofer.
4
Select a location for the Second S-Cube
surround speaker, connect power cable and
. For right
position the switch to the appropriate icon for left
.
8
HDMI
OUTPUT
Insert the
HDMI output that will
connect to the display.
Please note: The S-Cubes
are set up to power on
automatically to the surround
sound system only when
connected to a power supply.
DC
or right surround.
9
Connect the power
supply to the sub-woofer.
The Logo will turn red on
the subwoofer.
Dolby, Dolby Atmos, Dolby Audio,
Pro Logic, and the double-D symbol
are trademarks of Dolby Laboratories
Advertisement
