Positioning and connecting
en
Keep the screws and sleeves in
Note:
a safe place.
Take the hoses out of the holders.
1.
Unscrew and remove all four
2.
transport brace screws.
Remove the sleeves. To do this,
remove the mains cable from the
holders.
Fit the covers. Lock the covers firmly
3.
in place by applying pressure to the
snap-in hooks.
14
Hose and cable lengths
Left-hand connection
■
Right-hand connection
■
The following are available from
Tip:
specialist dealers/the after-sales
service:
An extension for Aqua-Stop or cold
■
water supply hose (approx. 2.50 m);
order no. WMZ 2380
A longer supply hose (approx.
■
2.20 m) for standard model