Differential Pressure Switches DPS Series
FOR AIR CONDITIONING / VENTILATION, USER-ADJUSTABLE
Differential pressure switches e.g. for monitoring filter, fan,
fire damper, or air flow status of air handling systems.
Switching-point easily adjustable with scale in Pascal;
Direction of M20x1.5 conduit entry can be rotated in steps
Only one screw needed for housing cover.
CE according to 2014/35/EU.
EC Gas Appliance Directive 2009/142/EC according to
DIN EN 1854: 2010.
CONTENTS OF DELIVERY
The delivery includes (in the case of individual packages) the
1 DPS Differential Pressure Switch
1 Data Sheet with installation information
1 DPSA duct kit, consisting of:
2 m of silicone hosing
2 joining pipes with four screws
2 self-tapping screws for mounting the housing
3 terminal screws for electrical installation
Bulk packages available, upon request.
U.S Registered Trademark
Copyright © 2017 Honeywell Inc. All Rights Reserved
PRODUCT DATA AND INSTALLATION INSTRUCTIONS
Max. operating pressure 10 kPa
range for upper
*The trip pressure refers to vertical mounting. In case of
horizontal mounting (with the cover pointing upwards), the
range values increase by 20 Pa.
See "Mounting/Einbau/Montage" on page 4.
ACCESSORIES / DELIVERY OPTION
DPST: Set of three screw terminals
DPSJ: Joining pipe (part of DPSA duct kit)
DPS...B in bulk pack (45 pc. per box), without
accessories, but with 1 set of Mounting Instructions
air, non-flammable gases, and
two plastic tubes, outside
diameter: 6.0 mm
1.5 A, (0.4) /250 Vac
AMP connectors, 6.3 x 0.8,
DIN 46244 or screw terminals
integrated in bottom housing
(alternative: mounting angles)