Instruction Manual Internet / Wi-Fi, DAB, FM Radio System...
Page 3
WARNING • TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. • REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
L’adaptateur AC/DC de l’appareil ne doit pas être obstrué ou doit apparatus. être facilement accessible pendant son utilisation. Pour être complètement Only use attachments/ accessories specified by Monitor Audio. déconnecté de l’alimentation d’entrée, l’adaptateur AC/DC de l’appareil doit être Use only with the cart , stand, tripod, bracket, or table specified by the déconnecté...
Music Player Display TIMe AnD DATe SeTTInGS PRoDuCT SeT uP DAB RADIo To Manually Set the Time and Date Where to Position your AirStream 10 What is DAB Digital Radio? Auto update Switching on and Selecting DAB Mode Set Format...
Holidays) and can be contacted on: display. +44 (0)1268 740580 (local call rate). or at xxxxxxxxxxxxxxxxxxxx Monitor Audio have used their vast experience and knowledge of the hifi industry and What’s in the Box? transferred it into complete radio solution. 1 x Airstream 10 Radio...
• Stand By - Turns the AirStream 10 on and off out of stand by mode. When in device is set to approximately three quarter’s volume for best playback quality Stand by, you can set the display to be full illuminated, partially or not at all.
(if it is not displayed, press the menu button): Where to position your airStream10 Main Menu It is important that you consider carefully in advance where your AirStream 10 will be Internet AirStream 10 situated and make sure that it is: Music player •...
Note: before you press the ‘Tune/ Select’ knob to select it. If your network name or SSID has been hidden, the AirStream 10 will not be able to Note: find it. you can either turn on the SSID of your access point and then select ’[Rescan]’...
(not included) to your AirStream 10. The headphone socket can be found on the right hand side of the AirStream 10 (see image on page 3) and when you have headphones connected the AirStream 10 speaker is switched off and all sound is via the headphones.
Continue to use the ‘Tune/Select Dial’ to find and select (by pressing) the station that you would like to listen to. Internet AirStream 10 The AirStream 10 will then connect to the radio station. The name of the station Last listened Station list >...
‘Tune/Select Dial’ you can now scroll and choose from the following 3 options (very much like the Internet radio station search): your AirStream 10 can store up to 4 internet stations in its preset memories for instant Location - enables you to choose a continent and then a country from that access to your favourites stations.
When a station is tuned in or selected from a preset, below is an example of the display and what the icons mean My favourites - you can create a list of your own favourite AirStream 10 stations, to appear under this option, via the frontier silicon website http://www.Wi-FiAirStream...
Details on how to do this are below. In order to play the music files you have stored on your computer via the AirStream 10 you must first ensure the following: Shared Folders - you can ‘share’...
Setting up for Shared media It is recommended that you have the PC and AirStream 10 near each other during this phase because you need to work on both units. The computer must be connected to the network that will be used to share the media with the AirStream 10.
Page 17
Click on the “unknown Device” and then click on the “Allow” button, then “ok”. Going back to the AirStream 10, select the Server/ PC again using the “Tune/ Select Dial”. If it can communicate with the Server/ PC, it will show the following...
Setting up for Shared folders music player Display Please ensure that your Server/ PC is on the same network as your AirStream 10 to When using the Music Player, below is an example of the display and what the icons share the music folders.
(see page 3) to bring up the Station List menu. you can then use the ‘Tune/ Select Dial’ to scroll through the stations. When you switch on your AirStream 10 it will always return to the mode that it was When the station that you would like to listen to is highlighted press the ‘Tune/ last used in (DAB/FM/Internet).
Press the ‘Info’ key to scroll through the display options. When your AirStream 10 is playing the station that you wish to save to a preset, press and hold the 1-4 preset button that you would like to store the station to. The display...
AirStream 10, you can use this control signal to expand or compress the dynamic frequency and then manually adjust the aerial, or the location of the AirStream 10, to range (the difference between the loudest and quietest sounds) of the reproduced get the strongest possible signal for that channel in your location.
DAB station list and those that you cannot receive will be at the bottom, prefixed by a’?’. This Symbol will always be displayed when the AirStream 10 is To change the station order, when in DAB mode: powered. It symbolises that the product is connected to the mains voltage supply.
Alternatively, you can manually When your AirStream 10 is in FM mode it can receive Radio Data System or ‘RDS’ scan for stations, by pressing the left or right arrow buttons.
DD/MM/yyyy Storing a fm Station preset your AirStream 10 can store up to 4 FM stations in its preset memories for instant access to your favourites. This Symbol will always be displayed when the AirStream 10 is powered. It symbolises that the product is connected to the mains Note: voltage supply.
Audio In Today’s Date: DD/MM/yyyy This Symbol will always be displayed when the AirStream 10 is powered. It symbolises that the product is connected to the mains voltage supply. This is the time and will be constantly displayed on your AirStream 12:00 monitoraudio.co.uk...
When you AirStream 10 is in standby mode, the display will show the time and date. for each one. you must first set the time and date on your AirStream 10 before you can use the alarm functionality. When an alarm is set, a symbol will appear in the to manually Set the Date and time: stand by screen with the time the alarms is set for within it.
Language auto update you Can set your AirStream 10 to automatically update the time and date when you LcD StanDBy-BacKLIgHt are tuned to a DAB (not uS version), FM radio station or network that provides this service. you can select to turn the auto update feature off. To manually set, go to...
Rotate the ‘Tune/Select Dial’ anti-clockwise to highlight ‘yes’ and press to select. This enables your AirStream 10 to keep up to date with the latest soft and firm ware updates. These changes could be minor bug fixes, or updates to the systems...
To ensure your AirStream 10 is always kept up to date with the very latest software changes, we would recommend enabling the ‘Auto-Check Setting’ in the update menu. This is done by: From the System update menu, rotate the Tune/Select Dial to highlight the ‘Auto-check Setting’...
The person who set up your network will be able to advise if contact your broadband provider you need to enter the MAC address of your AirStream 10 to the list of allowed • you can see the computer that you want to play music from but cannot find any devices in your access point.
Try moving your AirStream 10 to an alternative location to see if the reception your AirStream 10 and so it may be a good idea to have checked this before you call. improves. Please remember to scan for DAB stations again once you have To check the software version of your AirStream 10: moved your AirStream 10.
Helpdesk on 0845 833 1673 (local rate call your AirStream 10 is of superior design and manufacture and should be treated with charge applies). If your problem cannot be solved by our Helpdesk, you will need to care. The suggestions below will help you to enjoy this product and the benefits it return your product to the place it was purchased.
Need help?
Do you have a question about the AirStream 10 and is the answer not in the manual?
Questions and answers