Cleaning The Vehicle - VESPA GTS 300 i.e. Manual

Cleaning the vehicle

Use a low pressure water jet in order to soften the dirt and mud deposited on painted
surfaces. Once softened, mud and dirt must be removed with a soft sponge for body-
work soaked with water and shampoo (2-4% of shampoo in water). Then rinse
abundantly with water, and dry with a shammy cloth. Any polishing with silicon wax
must always be preceded by washing
WARNING
IF THE SCOOTER IS USED ON DUSTY ROADS IT IS NECESSARY TO SERVICE
THE TRANSMISSION COVER FILTER SPONGE MORE FREQUENTLY.
CAUTION
WASHING COMPOUNDS COULD POLLUTE THE WATER. THE VEHICLE MUST
BE WASHED AT A WASHING FACILITY WITH EQUIPMENT FOR PURIFYING THE
WASHING WATER.
WARNING
THE USE OF A HIGH-PRESSURE WATER JET IS STRONGLY DISCOURAGED
FOR ANY ENGINE CLEANING OPERATION; HOWEVER, IF NO OTHER MEANS
ARE AVAILABLE, IT IS THEN NECESSARY TO:
• ONLY USE FAN SPRAY JETS.
• DO NOT PLACE THE WATER JET NOZZLE CLOSER THAN 60 CM.
• DO NOT USE WATER AT TEMPERATURES OVER 40ºC.
• • DO NOT USE HIGH-PRESSURE WATER JETS. •
76