Assembly - Weslo WLEVEX71417.0 User Manual

ASSEMBLY

• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• Left parts are marked "L" or "Left" and right parts
are marked "R" or "Right."
1. Go to iconsupport.eu on your computer and
register your product.
• activates your warranty
• saves you time if you ever need to contact
Customer Service
• allows us to notify you of upgrades and offers
Note: If you do not have internet access, call
Customer Service (see the front cover of this
manual) and register your product.
2. Attach the Rear Stabilizer (1) to the Handlebar
Frame (2) with two M8 x 50mm Carriage Bolts
(3), two M8 Curved Washers (4), and two M8
Acorn Nuts (5).
• In addition to the included tool(s), assembly
requires the following tool(s):
one Phillips screwdriver
one adjustable wrench
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1
2
2
5
4
1
3
6
5
4