Industry Canada (Ic) Notification - Motorola PMP 58430 User Manual

PMP 400/430 and PTP 200/230 Series
ABZ89FT7629 ---
--- 109W-5440
ABZ89FT7631 109W-4940
Note 1: To ensure regulatory compliance, including DFS compliance, the professional installer is responsible
for:
setting the Region Code on the Configuration => General page to the correct region
setting the Transmitter Output Power on the Confiiguration => Radio page no higher than listed for a given
configuration
setting the External Gain on the Configuration => Radio page, if displayed, to the gain of any external
device (such as a reflector or lens)
6.2.2

Industry Canada (IC) Notification

For 5.4 and 5.8-GHz devices:
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
Users should be cautioned to take note that in Canada high power radars are allocated as
primary users (meaning they have priority) of 5650 – 5850 MHz and these radars could cause
interference and/or damage to license-exempt local area networks (LELAN).
Issue 6.0 May 2011
Motorola PMP Solutions User Guide Supplement
10 MHz channels,
centered on 5730-
5845 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
20 MHz channels,
centered on 5735-
5840 in 5 MHz
increments (within the
5725-5850 MHz ISM
band)
10 MHz channels,
centered on 5480-
5595 and 5655-5710
MHz in 5 MHz
increments (within the
5470-5725 MHz U-NII
band)
10 MHz channels,
centered on 5480-
5595 and 5655-5710
MHz in 5 MHz
increments (within the
5470-5725 MHz U-NII
band with 5600-5650
MHz excluded)
10 MHz channels,
centered on 4945-
4985 in 5 MHz
increments (within the
4940-4990 MHz
public safety licensed
band)
18 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
5440 AP
x 5° -3 dB beam width)
with 1 dB connector cable
loss
17 dBi integrated antenna
5440 SM
(15° x 15° -3 dB beam
5440 BH
width)
18 dBi connectorized
PCTEL Model
8514724E01 antenna (60°
5440 AP
x 5° -3 dB beam width)
with 1 dB connector cable
loss
17 dBi integrated antenna
5440 SM
(15° x 15° -3 dB beam
5440 BH
width)
18 dBi connectorized
PCTEL Model AP
4940 AP 85010066001 antenna (60°
x 5° -3 dB beam width)
with 1 dB cable loss
17 dBi integrated antenna
4940 SM
(15.5° x 17.5° (el x az) -3
4940 BH
dB beam width)
10 dBm
10 dBm
10 dBm
10 dBm
18 dBm
18 dBm
Page 67 of 77