viveroo loop User Manual page 8

Installation guide
LockingSystem security, PIN controlled opening with viverooApp
00 00 00 00 00 01
Installation guide security
3 Now you will be redirected to a dashboard where all
your available viverooDocks are being displayed.
! IMPORTANT: Connect your viverooDock to the
power supply so that the Bluetooth module can send
out a signal and is displayed in the app.
! Additionally, activate Bluetooth on your iOS device.
4 Tap the image of your Dock. Your camera is now
activated, please allow access for using your camera.
To pair your iOS device and your viverooDock, scan
the QR code on the included key card. This procedure
is necessary only once, after the first pairing the
devices are able to communicate with each other.
A message indicates the successful pairing of the
devices.
! IMPORTANT: Please keep the key card in a safe
place. For pairing a new iOS device or resetting the
password it is needed again. The key cards are also
archived by viveroo and can be requested at any
time.
5 When you now tap your viverooDock, the pin is
magnetically attracted and unlocks the dock. Then
you can press the button and open the iPad shelf. The
time slot in which the dock is unlocked, is 5 seconds.
After that, the dock is locked with an audible click
again.
A tap on the little "i" next to the dock allows you to
make some adjustments, such as the model, color or
the name of the dock.
page of 2 2