Safety Information - viveroo loop User Manual

Safety information

Please read the assembly instructions included carefully. Please
!WARNING
read this loop user manual completely before using your loop.
Please follow the instructions and recommendations to ensure
proper use and maximum enjoyment.
loop and all loop mounting sets are intended for use in enclosed
Safety
and dry living spaces.
information
The following conditions must be provided:
- Operating temperature between 0° C (32° F) and 35° C (95° F).
- Relative humidity (during use): 20 % to 90 %, non-condensing.
- No external environmental influences such as oil, chemicals, salt,
The maximum altitude is 2.000m.
Installation, service or repairs, if necessary, may only be performed
by authorized persons.
The installer is responsible for selecting the proper mounting
location and safe installation of loop. This also applies to
installation in movable parts, such as doors. The installer is
responsible for performing and documenting all necessary safety
tests.
All electrical installation work may only be conducted by authorized,
trained electricians, always adhering to the general rules and
regulations applying to electrical installation. Wire end sleeves and
ferrules must be used for flexible cables.
Should it become apparent that safe operation of loop is not
assured, then loop must immediately be taken out of service and
secured against potential misuse. If the loop functions are limited,
blocked or disabled, if an unusual odor is present, if noises such as
scratching are audible or damage is visible, safe operation can no
longer be guaranteed.
extensive dust, etc.
!