Table of Contents
Advertisement
BIOS Setting
Setup Prompt Timeout
Bootup NumLock
State
Quiet Boot
Fast Boot
Boot Option #1~#n
Hard Drive BBS
Priorities
CSM Configuration
BU-2509 SERIES USER
Options
Numeric
(from 1 to 65535)
- On
- Off
- Disabled
- Enabled
- Disabled
- Enabled
- [Drive(s)]
- Disabled
Sub-Menu
Sub-Menu
S MANUAL
Chapter 4 AMI BIOS Setup
Description/Purpose
Number of seconds to wait for setup activation
key.
Selects the NumLock sate after the system is
powered on.
• On: Enables the NumLock function
automatically after the system is powered
on.
• Off: Disables the NumLock function after
the system is powered on.
Enables or Disables Quiet Boot options. When
this option is set to "Disabled", BIOS will
display normal POST messages.
Enables or Disables Fast Boot option. It allows
users to reduce the system startup time and
start up the system in a fast manner.
Allows users to choose the boot sequence
from the available device(s). Note that in the
menu displayed, you will only see the device
with the highest priority for a specific boot
device type.
Defines the boot order for all the hard drives
connected to the system, e.g. SATA, USB
drive.
CSM configuration: Enable/Disable, Option
ROM execution settings, etc.
Page: 4-52
Advertisement
Table of Contents
