Child Lock Function; Operation Guide; Replacement Of Batteries In Remote Controller - COMFORT-AIRE PTTC09A-1 Owner's Manual

Owner's Manual - Room Air Conditioner - PTTC/PTTE/PTTH-09/12A-1

Child lock function

Pressing "+" and "-" buttons simultaneously will turn on or turn off child lock function.
When child lock function is started up, LOCK indicator on remote controller is ON. If you
operate the remote controller, remote controller won't send signal.
Temperature display switchover function
Under ON status, press "-" button and "+" button simultaneously to switch between°C
and °F.

Operation guide

1. After putting through the power, press "ON/OFF" button on remote controller to turn on
the air conditioner.
2. Press "MODE" button to select your required mode: AUTO, COOL, DRY, FAN, HEAT.
3. Press "+" or "-" button to set your required temperature. (Temperature can't be adjusted
under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed.
5. Press "SWING" button to select fan blowing angle.

Replacement of batteries in remote controller

1. Press the back side of remote controller on the spot
2. Replace two No.7 (AAA 1.5V) dry batteries and make
sure the positions of + and - polar are correct.
NOTICE
unit.
there should be no obstacles between them.
telephones; remote controller should be close to indoor unit during operation.
with s
-12-
battery
are
15
reinstall
s