Related Manuals for CERTIFIED 060-3938-8
Summary of Contents for CERTIFIED 060-3938-8
- Page 1 060-3938-8 SNOWBLOWER CABIN IMPORTANT: INSTRUCTION Please read and understand all instructions before use. Retain MANUAL this manual for future reference.
-
Page 2: Parts List
060-3938-8 contact us 1-855-867-5633 PARTS LIST DESCRIPTION QTY. Horizontal mounting bar Frame support with end cap Lower rib (marked as LF in front, LB at the back) Upper back rib (marked as UB) Upper front rib (marked as UF) -
Page 3: Specifications
060-3938-8 contact us 1-855-867-5633 INTRODUCTION Provides protection from blowing snow. Features an easy, no-drill installation. Includes a counterweight sandbag. SPECIFICATIONS Colour Black Weight 21 lb (9.52 kg) Dimensions 28 x 30 x 50" (71.1 x 76.2 x 127 cm) -
Page 4: Specific Safety Precautions
060-3938-8 contact us 1-855-867-5633 2. Avoid wearing clothes or jewellery that can become entangled with the moving parts of a tool. Keep long hair covered or bound. 3. Do not overreach when operating a tool. Proper footing and balance enables better control in unexpected situations. - Page 5 060-3938-8 contact us 1-855-867-5633 Tools required for assembly: • Tape Measure • 10" Adjustable Wrench • 7/16 or 1/2" Wrench or Socket • 13 to 15 lb (6 to 7 kg) of Dry Sand or Non-clumping Cat Litter 1.
- Page 6 060-3938-8 contact us 1-855-867-5633 Fig. 5 Fig. 4 3. Install the lower horizontal mounting bar. The horizontal mounting bars (#1) attach to the handlebars of the snowblower using a U-clamp system that is designed to fit di erent machines. Position the bars properly so they do not obstruct the snowblower’s controls, lights or moving parts.
- Page 7 060-3938-8 contact us 1-855-867-5633 5. Assemble the legs of the frame supports together. Align the holes and slide the frame pin (#18) through. Fasten to lock in place. Fig. 8 6. Install the upper horizontal mounting bar. a. Swivel the shorter legs of the frame support upwards until they are parallel to the ground.
- Page 8 060-3938-8 contact us 1-855-867-5633 9. Tighten all mounting bolts securely. Fig. 11 10. Install the lower ribs (#3) a. Assemble the lower ribs together. Secure using a 1" hex cap screw (#9) and a 1/4" locknut (#14). b. Attach the lower ribs assembly to the frame supports using 1 3/4"...
- Page 9 060-3938-8 contact us 1-855-867-5633 REMOVING THE CABIN 1. Unclip the buckle straps from the lower mounting bar. 2. Remove the frame pins from the frame supports (Fig. 19). 3. Gently lift the cabin away from the lower frame supports (Fig.
- Page 10 060-3938-8 contact us 1-855-867-5633 2 YEAR LIMITED WARRANTY This CERTIFIED product is guaranteed for a period of two (2) years from the date of original retail purchase against defects in workmanship and materials. Subject to the conditions and limitations described below, this product, if returned to us with proof of purchase within the stated warranty period and if covered under this warranty, will be repaired or replaced (with the same model, or one of equal value or specification), at our option.