QSC DCM 10 User Manual page 4

Introduction
Thank you and congratulations on your purchase of the QSC DCM Digital Cin-
ema Monitor. This product represents the state-of-the-art for cinema-based
signal processing and monitoring functions in a single, integrated system.
Designed to compliment QSC's DCA (Digital Cinema Amplifier) Series and DCS
(Digital Cinema Speaker) Series products, the DCM optimizes loudspeaker per-
formance while facilitating easy cinema sound system wiring and configura-
tion. To get the most from your investment, we encourage you to review this
manual carefully.
The QSC DCM provides a wealth of signal processing functions with the ability
to copy and transfer settings—resulting in fast system setup time in multiplex
theaters where multiple rooms share similar characteristics. Providing both
monitor and crossover functions in a single unit, the DCM is capable of simple
crossover adjustments via a personal computer (PC). These modifications can
be password protected for tamper-proof system control.
Fast Setup with Easy Wiring
Your DCM takes advantage of the unique DataPort found on DCA Series ampli-
fiers and thus greatly simplifies system wiring—reducing installation and labor
costs in the process. A single VGA-style cable per amplifier channel pair con-
tains two input signals, two return signals, power on/standby control, and two
channels of load monitoring.
The included PC configuration software further enhances the DCM setup. This software includes a database that lists the default parameters for pop-
ular cinema loudspeaker models. Commonly used configurations can be saved to disk, facilitating the easy transfer of settings to other DCMs.
Advanced Monitoring Control
In addition to the monitoring of your amplifier's audio I/O, your DCM includes QSC's exclusive "Load Fault" detection feature. The DCM monitors for
possible loudspeaker system or wiring faults and notifies you via LED Load Fault indicators.
System Requirements
DCM Manager software is designed to control one DCM hardware unit at a time. To use this software with the DCM hardware unit, you must have
the following:
1- Digital Cinema Monitor unit
2- DCM Manager 2007 software installation CD
3- IBM-compatible PC with a 1 GHz Pentium 4 processor (or better)
Windows XP or VISTA operating system
Microsoft® Internet Explorer
Minimum of 512 MB of RAM
Minimum of 500 MB of available hard disk storage space
CD-ROM drive
Display resolution of 1024 x 768, 16 colors minimum
USB port
To complete your Cinema System, you will also need a cinema processor, QSC Audio's DCA amplifiers, loudspeakers, and necessary cables.
Unpacking
The DCM is highly durable and carefully packaged. We recommend you inspect the unit carefully after removing it from the packaging, as occasion-
ally there may be damage due to some unfortunate incident during shipment. Report any damage to the shipping carrier. We recommend saving the
carton and packing material in case the unit must be shipped back to your dealer, distributor, or service center. Also note: some freight companies
consider damage claims without the original packing materials invalid.
The QSC shipping box should contain:
1- the DCM unit
2- this owner's manual
3- AC power cord, IEC-type, 18 AWG, 6 feet long, 120V
4- warranty card
5- DCM Manager Application Disk
Table 1: Supported Formats By Model
DCM 10
Format
DCM 10D
6 Channel Passive Yes
6 Channel Bi-Amp Yes
6 Channel Tri-Amp No
6 Channel Quad-Amp No
8 Channel Bi-Amp No
8 Channel Tri-Amp No
8 Channel Quad-Amp No
Surround-EX Yes
DCM 30
DCM 30D
No
Yes
Yes
Yes
Yes
Yes
Yes
Yes