Bosch HEZBS301 Installation Manual page 6

Figure 3: Low Backguard placement
9. Secure the Low Backguard with one screw at each end
(through holes 2 and 3) and hold the Low Backguard in
a vertical position while securing the five screws in the
back.
10. Place the rear louver cover into its slots and secure
with four screws.
11. Replace the cooktop grates.
12. If necessary, have a qualified service person reattach
electrical or gas connections.
13. Slide the range back into position.
Figure 4: Low Backguard in position
English 4 9001050650 Rev A