Table of Contents
Advertisement
ELECTRICAL CONNECTIONS
Fuse replacement
If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to
change a fuse in this type of plug use an A .S .T .A . approved fuse to BS 1362 type
and proceed as follows:
B
Socket outlet / plug
If the fitted plug is not suitable for your socket outlet, contact After-Sales Service
for further instruction. Do not attempt to change the plug yourself. This procedure
needs to be carried out by a qualified technician in compliance with the manufactu-
rer's instructions and current standard safety regulations.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched off and discon-
•
nected from the power supply before performing any cleaning or main-
tenance operation - risk of electrical shock. Never use steam cleaning
equipment.
•
Do not directly spray cleaners on the appliance – risk of electrical
shock.
1. Remove the fuse cover (A) and fuse (B)
2. Fit replacement 13A fuse into fuse cover
A
3. Refit both into plug
Important:
The fuse cover must be refitted when changing a fuse
and if the fuse cover is lost, the plug must not be used
until a correct replacement is fitted. Correct replace-
ments are identified by the colour insert or the colour
embossed in words on the base of the plug. Replace-
ment fuse covers are available from your local electri-
cal store.
en
co.uk
co.uk
hotpoint.
hotpoint.
7 7
Advertisement
Table of Contents
