Table of Contents
Advertisement
78
Memory Partition
The internal storage in XM2go can store recorded XM content and MP3/WMA files. By
default, the storage is divided 50/50, but you can select different memory partitions:
typical storage for content
setting
recorded from XM
50/50 XM/PC files
25 hours
100% XM
50 hours
To change the memory partition:
1. Place your XM2go into the home dock and connect the AC power adapter.
2. Select XM ¨ Settings ¨ Setup ¨ Memory Partition.
3. Highlight the desired setting and press the XM button.
4. Confirm by selecting Yes, or cancel by selecting No.
CAUTION:
When you change the memory partition, you will erase all your stored XM content
and MP3/WMA tracks from your XM2go.
Settings
typical storage for PC
(MP3 and WMA) tracks
8 hours
0 hours
Restoring Factory Defaults
To restore all XM2go settings and preferences to a "factory fresh" state:
1. Select XM ¨ Settings ¨ Setup ¨ Factory Defaults.
2. You should see this display:
3. Confirm by selecting Yes, or cancel by selecting No.
79
Restore just the settings to
factory defaults.
Restore settings to factory
defaults and erase all music.
Advertisement
Table of Contents
