Table of Contents
Advertisement
74
Channel Access
Direct Tune
Normally, as you scroll through live XM channels using the up and down arrow buttons, you
can preview the channel list before selecting one channel. XM2go does not switch to that
channel until you push the XM button. You can change this so that XM2go automatically
tunes to the channel that you're previewing.
1. Select XM ¨ Settings ¨ Preferences ¨ Channel Access ¨ Direct Tune.
2. Select Direct Tune On.
3. Press the XM button to confirm your selection. Then press the left arrow button repeatedly
until you return to normal operation.
To return XM2go to its default behavior, select Direct Tune Off.
Settings
Channel Skip/Add
You can simplify the list of channels that you see when you press the up and down arrow but-
tons. To skip a channel:
1. Select XM ¨ Settings ¨ Preferences ¨ Channel Access ¨ Channel Skip/Add.
2. You will see a list of channels. Press the XM button to skip a channel. You'll see the Channel
Skip icon
displayed beside the channel name. You can choose to skip more than one
channel.
3. To add a channel that has been skipped, highlight that channel then press the XM button.
4. Press the left arrow button when you're finished.
5. XM2go confirms by displaying "Channel List Updated."
You can still tune to a channel directly by using the virtual keypad to enter its channel number.
Channel Skip/Add should not be used as a form of parental control. To completely block access to
an XM channel, contact XM Listener Care at 1-800-XM-RADIO (1-800-967-2346).
75
Advertisement
Table of Contents
