Installing The Group 1,2,3 Car Seat Using The Vehicle's Isofit System - Toco grow-fix Instructions Manual

Installing the group 1,2,3 car seat using the vehicle's
ISOFIT system
1. Place the car seat on a suitable passenger
seat.
Note: If the passenger seat has a headrest
then it must be removed before fitting the
car seat.
Click
3. Hold the seat with both hands and slide
the seat back, guiding the two ISOFIT
arms into the insert guides till the two
arms lock securely with a "click" onto both
ISOFIT anchor points.
2. Pull the red lever (A) at the front of the
car seat to extend the two ISOFIT arms
(B).
green
4. IMPORTANT! Check that BOTH
lock indicators on each side of the seat
have turned green indicating the seat is
LOCKED in position.
Pull the seat forward to check that the
ISOFIT system is locked in place
B
A
red
9