Bosslan BOSST60 Quick Start Manual

See also: User Manual

BOSST60 Quick Start Guide

Installation And Access.......................................................................................................................2

Configure Bosst60 To Make Voip Calls ..........................................................................................3

Wan Config .....................................................................................................................................3

Sip Config.........................................................................................................................................4

Table of Contents

Need help?

Do you have a question about the BOSST60 and is the answer not in the manual?

Page 1 BOSST60 Quick Start Guide Installation and access........................2 Configure BOSST60 to make VoIP calls ..................3 WAN Config .............................3 SIP Config............................4...
Page 2 You can use the “Sysinfo” button to obtain BOSST60 WAN port IP. Modify your computer’s IP address to the same network as BOSST60 Key in BOSST60’s IP address in the web browser and press enter, then you can access BOSST60’s web manage interface. Remember the account is admin/admin for administrator and...
Page 3 Network WAN Config Enter to set the WAN setting: BOSST60 supports three different IP types: Static IP, Dynamic obtain IP (DHCP) and PPPoE. You can use either of these IP types to connect the internet. Use Static IP: ----Select “Static”;...
Page 4 Then the BOSST60 will connect to the internet through PPPoE , and automatically obtain the IP address , Netmask, Gateway, Primary DNS and Alter DNS information. SIP Config VoIP SIP Config Enter setting page and set the sip information ----Register Server Addr : sip server address;...