Table of Contents
Advertisement
MCD-HF200(GB)
3/5/03 3:15 PM
Preparation before
using your unit
Using standard batteries
1
Open the cover of the battery
compartment.
2
Carefully check the correct
orientation of the positive and
negative terminals of the batteries.
• Use two AA/LR6 type 1.5 V batteries.
Use two AA/LR6 alkaline batteries.
Manganese batteries have a shorter
battery life.
Battery Life
(Using alkaline batteries)
The battery life-time is based on continuous use.
*
• MP3-CD : 16 hours 30 minutes max.
• CD (When ESP is Off) : 14 hours 45 minutes max.
CD (When ESP is On) : 9 hours 50 minutes max.
Time for
•
Replace the batteries if the remaining battery power indicator "
Battery
•
When the radio function is enabled, the remaining battery power will indicate "
Replacement
•
Even though the remaining battery power indicator "
if the batteries have already expired, the LCD will not be lit.
•
Warning
Do not mix old and new batteries.
•
Remove the batteries if they will not be used for a long time.
11
•
Standard batteries cannot be recharged.
•
Remove the batteries when you use an AC adaptor.
Page 11
(not supplied)
" may be flashing,
CD Playback
1
Slide the Open button to
open the door.
Insert a CD.
• Push the door to close it.
2
Press the Play/Pause
( √» ) button.
• Once the CD is
recognized, playback
commences.
3
To stop playback, press
the Stop ( ) button.
• Press the Stop ( )
button again to switch
off the unit.
• The power will automatically switch
off after 15 seconds, even if you do
not press the Stop ( ) button.
To temporarily pause playback
" flashes.
".
Press the Play/Pause ( √» ) button.
•
Playback will be temporarily suspended.
•
Press the Play/Pause (
playback.
normal
01
CDDA Disc
Track Number Indicator Playtime Indicator
√»
) button again to resume
esp Flat
03 : 20
12
Advertisement
Table of Contents
