Advertisement
1,5V x 7
AA (LR6)
For longer life, use alkaline batteries.
• Locate the battery compartment door
on the top side of the hub.
• Loosen the screws in the battery
compartment door and remove the door.
• Insert four, new AA (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screws.
• If the hub begins to operate erratically,
you may need to reset the electronics.
Remove the batteries and reinstall them.
• When the sounds/lights become faint or
stop, it's time for an adult to change
the batteries.
• Open the fasteners on the tummy wedge.
Remove the electronic unit.
BATTERY
INSTALLATION
• Loosen the screw in the battery
compartment door and remove
the door.
• Insert three, new AA (LR6)
alkaline batteries.
• Replace the battery compartment door
and tighten the screw.
• Insert the electronic unit back inside
the tummy wedge. Make sure the power
button faces you and the push button is
toward the front of the tummy wedge.
• If the electronic unit begins to operate
erratically, you may need to reset the
electronics. Slide the power switch off
and back on.
• When vibrations become faint or stop, it's
time for an adult to change the batteries.
5
Power Button
Push Button
Advertisement
