Wiring (Power, Analog Output, Alarm) - Omega DPG409 SERIES User Manual

• Immediately discontinue use of the battery if the battery emits an unusual
smell, feels hot, changes color or shape, leaks or appears abnormal in any
other way.
• Do not place the battery in microwave ovens or high-pressure containers.
Standard 1.5V C cell Alkaline batteries can be used as
an alternative to the standard Lithium batteries. You must
first remove all batteries from the gauge. Then configure
jumper S2 with only position M installed as indicated
in Figure 4-3. Always remove all 3 of the S2 jumpers
before changing configurations. Failure to properly
configure the jumpers can damage the gauge. Battery
life is subject to usage conditions. Battery life estimates
are provided for Lithium batteries only.
S2-M
S2-D&E

4.5 Wiring (Power, Analog Output, Alarm)

Power Supply Wiring Example
NOTE:
TB2
BATTERY
BATTERY
TB1
Figure 4-3. Battery Type Configuration
24Vdc POWER SUPPLY
–
Figure 4-4. Wiring - Power Supply
Installation, Mounting & Wiring
ALKALINE SETTING*
M
E
D
+
5 4
TB2
PIN 1
4
LITHIUM SETTING*
M
E
D
4-3