Advertisement
Advertisement
Table of Contents
Related Manuals for Mustcam H806P
Summary of Contents for Mustcam H806P
-
Page 1: Quick Start Guide
IP Camera Quick Start Guide ==================== H Series V2.0 Android... -
Page 2: Package Contents
1． Package Contents 5V Power Adaptor Network Cable (optional) Bracket and Screws Wi-Fi Antenna Quick Start Guide 2． Install the IP Camera Make sure that Internet is accessible for the IP Camera. As the above illustration shows, connect the IP Camera with router by net cable, power the IP Camera and then it will get ready for working after around 1 minute. - Page 3 3． Access the Camera by Smart Phone You can access the Camera by Smart Phone with iOS or Android system. The following takes iOS as an example to guide the operation. The operation of Android is almost the same as that of iOS. 1) Download App Android: Install NetCam.apk from the CD, or search and download from play.google.com.
- Page 4 4) From the IP Camera search result list, you can double-click the ID of a camera and then input user and password. By default, user name is admin, password is 123456. 5) After added, if the camera’s status is online, you can click it to view live video.
- Page 5 4. Access the Camera by PC 1) Install the software NetCam from the CD. Double-click the icon generated on the desktop, and then enter the following main interface. 2) Access by LAN (1) Search camera: click to open the device list; you can see a search list as follows.
- Page 6 (2) Double-click IP address of a camera to be added, and then an interface as follows will show. Device Name: you can name it as you want, for example, Living room. User name and password: by default, they are admin and 123456. Video format: if the camera is HD (720P) H.264, then choose H.264 stream.
- Page 7 3）Remote Access （1） Start the PC client software NetCam, Click to open the device search list and click Add. （2） Input device name （ you can name it as you want, fox example, Living room） . Then input user name and password (admin and 123456 by default). Input the P2PID that are on the label at the bottom of the camera.
-
Page 8: Change Password
5. Change Password At the main interface, double click a Camera and then enter into the following: The default login as administrator username is admin, password is 123456. In the Password box, enter the password you want to update, click on settings. 6. - Page 9 Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Need help?
Do you have a question about the H806P and is the answer not in the manual?
Questions and answers