Table of Contents
Advertisement
TROUBLE SHOOTING GUIDE
Fault Code
E01
The wire from computer to bottom
control board didn't connected well
E02
Protect the exploding
E05
Overcurrent Protection
E06
Control board self-checking
E08
EEPROM damage
Calorie Computational formula
70.3×V(Km/h)×t(h)
It will take 70.3 calories per kilometers under condition that the incline is 0.
13
Main reason
Solution
1 ．
Check the connection wire between
computer and control board was well
connected.
2 ． Make sure the IC on the control board
was well inserted. If not re-insert.
3． Abnormal power supply in control board.
Please change a new control board.
1 ．
Bad contact with motor open circuit.
Please change a new motor or check the
connector.
2． Power tube was puncture. Please change
a new Power tube or control board.
1． Overloaded。
2 ． Running board with heavy resistance.
Need to be oiled
3． Damage in Motor. Change a new motor.
Change the control board
Advertisement
Table of Contents
