Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Reach T-7
Summary of Contents for Reach T-7
-
Page 1: Installation Guide
Installation Guide Reach T-7... -
Page 3: Spare Parts List
ASSEMBLY INSTRUCTIONS When you open the carton, you will have below spare parts: SPARE PARTS LIST: SPECIFICATI DISCRIPTION SPECIFICATION DISCRIPTION Oil Bottle MAIN FRAME S=13\14\15mm 1 SAFETY KEY Allen Wrench... -
Page 4: Fixing Tools
13 5# Allen Wrench Bolt M8*45 14 6# Allen Wrench Bolt M8*16 27 Basic right cover Lock washer 26 Basic left Bolt ST4.2*19 cover FIXING TOOLS: 5#Allen Wrench 5mm 1pcs、 Notice: Do not get through power before complete assembly ASSEMBLY STEPS STEP 1：... - Page 5 STEP 3： 1. Push up the Computer and L& R upright as the arrow position. STEP 4： 1. Use 5# Allen wrench(13), the Bolt M8*45 (69), Lock washer（86）and to fix the Right Upright Tube onto the base. 2. Use 5# Allen wrench(13), use the M8*16 bolt(74) and lock washer（...
- Page 6 STEP 5： 1. Use ST4.2*19 Bolt (91), fix the base right cover(27) on the Right upright group and base. 2. Use ST4.2*19 Bolt(91), fix the base left cover(26) on the Left upright group and base. STEP6： Put safety key (49)on the its place, turn on the power switch.
- Page 7 Pulling up: 1、 Support place A with hands, then pull up the machine, till hearing the sound that pin bar B is locked into the round tube Pulling down: 1、 Support place A with hands. Hold up the machine slightly and kick the pin bar then pull down the frame by hand and let it down automatic till on the floor.
-
Page 8: Technical Parameter
Technical Parameter BUILT UP As the rating label 1691*720*1315mm POWER SIZE(mm) showing FOLDABLE 938*720*1525mm Maximum output As the rating label IZE(mm) power showing RUNNING 480*1300mm 1-16KM/H BOARD SPEED RANGE SIZE(mm) MAX USER 64 KG 120KG NET WEIGHT WEIGHT 1 LCD WINDOW Speed, Time, Distance, Calories, Pulse WITH BLUE BACKGROUND... -
Page 9: Troubleshooting Guide
TROUBLE SHOOTING GUIDE Fault Code Main reason Solution 1 ． Check the connection wire between The wire from computer to bottom computer and control board was well control board didn’t connected well connected. 2 ． Make sure the IC on the control board was well inserted. -
Page 10: Running Belt Adjustment
Running Belt Adjustment Warning: ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE CLEANING OR SERVICING THE UNIT. Clean: General cleaning the unit will greatly prolong the treadmill. Keep treadmill clean by dusting regularly. Be sure to clean the exposed part of the deck on either side of the walking belt and also the side rails. - Page 11 1. We suggest that you should switch off the power for 10 minutes after keep running 2 hours , so that it’s good for maintain the treadmill. 2. For avoiding the slipping during running , the belt should be not too loose; for avoiding the more abrasion between the roller and belt and maintain the machine’s good running ,the belt should be not too tight.
- Page 12 " ..CJY" --""-... - - · - --56 4 86...
- Page 13 DISCRIPTION SPECS QTY. DISCRIPTION SPECS QTY. Main frame Magnet ring Base frame Switch Right upright tube Standard power line Left upright tube Overload Protector Right Handrail tube AC single wire Incline frame bracket Blue single wire Motor bracket Brown single wire Running Board Strengthen Power line buckle Tube...
Need help?
Do you have a question about the T-7 and is the answer not in the manual?
Questions and answers