Settings; Common Settings; To Set Up Common Message Settings, Use The Following Functions; Text Message - Pantech C520 User Manual

Settings

Before you can send or receive messages using your phone, you must
configure their settings first. This information is normally pre-populated in
the phone by your service provider.
Press the [Menu] Soft key, select 2.Messaging, and then select

Common Settings

Select [Menu], select 2.Messaging,
Settings, and press the [OK] key.

To set up common message settings, use the following functions:

•
Default Edit Mode: Set in Alphabet mode (Multi-tab mode) or
Predictive mode (T9 mode).
•
Save Messages: If set as On, the sent message will be stored in the
[Sent].
•
Auto Delete Read Message: If setting is on and the inbox is full,
handset deletes the oldest read message and saves the new message
when it receives a new message.

Text Message

Press the [Menu] Soft key, select 2.Messaging, select 8.Settings, select
2.Text Message, and press the [OK] key.

To set up default Text Message information, use the following

functions:

•
Message Center: Store or change the number of your message center
that is required when sending a message.
8.Settings.
select 8.Settings, select 1.Common
•
E-mail Gateway: Store or change the number of your e-mail gateway
required when sending an e-mail.
•
Save to: Set the text message storage to SIM or phone. This option
might not be available depending on your SIM card.

Multimedia Message

Press the [Menu] Soft key, select 2.Messaging, select 8.Settings, select
3. Multimedia Message, and press the [OK] key.
To set up default Multimedia Message information, use the following
functions:
•
Message Center: Store or change the address of your message
center that is required when sending a message.
•
WAP Profiles: Set up WAP profile settings for multimedia message.
•
Delivery Reports: When this option is set to [On], the network informs
you whether or not your message has been delivered successfully.
•
Read Report: When this option is set to [On], the recipient's phone
sends a reply to let you know when your message has been read.
•
Message Lifetime: Set the duration of time your message is stored at
the message center while attempting to deliver it. You can select one of
1 Hour, 2 Hours, 6 Hours,
1 Week, 4 Weeks, 6 Months, or Maximum.

Voice Mail

Press the [Menu] Soft key, select 2.Messaging, select 8.Settings, select
4.Voice Mail, and press the [OK] key.
This number is normally pre-populated by your carrier during the activation
1 Day, 2 Days,
41