Table of Contents
Advertisement
User Manual
Nurse call function JNS-70MN
• Thank you for purchasing COMMAX products.
• Thank you for purchasing COMMAX products.
• Please carefully read this User's Guide (in particular, precautions for safety) before using a product and follow
• Please carefully read this User's Guide (in particular, precautions for safety) before using a product and follow
instructions to use a product exactly.
instructions to use a product exactly.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
• The company is not responsible for any safety accidents caused by abnormal operation of the product.
www.safemag.ru
www.safemag.ru
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Commax JNS-70MN
Summary of Contents for Commax JNS-70MN
- Page 1 User Manual Nurse call function JNS-70MN • Thank you for purchasing COMMAX products. • Thank you for purchasing COMMAX products. • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow • Please carefully read this User’s Guide (in particular, precautions for safety) before using a product and follow instructions to use a product exactly.
-
Page 2: Table Of Contents
www.safemag.ru Contents 1. Nurse call function Main screen composition ....................4 Conversation with an inpatient ..................5 Receiving a call from an inpatient ................7 Staff Call funtion ........................ 10 Emergency situation function ..................11 Simultaneous situation function ................. 13 Broadcasting function ..................... -
Page 3: Nurse Call Function
www.safemag.ru Chapter 1. Nurse call function 1. Main screen composition 2. Conversation with an impatient 3. Receiving a call from an impatient 4. Staff call function 5. Emergency situation function 6. Simultaneous situation function 7. Broadcasting function 8. Smart control function 8-1. -
Page 4: Main Screen Composition
www.safemag.ru I. Main screen composition ① ② ③ ④ ⑧ ⑤ ⑥ ⑦ Main screen ① , ② Page movement ⑥ Group broadcasting ③ Room number ⑦ Smart control ④ Bed number ⑧ Remote control ⑤ Whole broadcasting www.safemag.ru... -
Page 5: Conversation With An Inpatient
www.safemag.ru II. Conversation with an inpatient 1. Using the speed dial (After setting the bed number) 1. Pick the receiver or press the speaker button in front. 2. After pressing the relevant room number, press the bed number. Then, you can speak with by calling the relevant patient. - Page 6 www.safemag.ru 2. Using dial button 1. Pick the handset or press the speaker button in front. 2. After entering the relevant room number with the button in front, press the asterisk(*). If you press the pound button (#) after entering bed number, you can speak with the relevant patient by calling him or her.
-
Page 7: Receiving A Call From An Inpatient
www.safemag.ru III. Receiving a call from an inpatient 1. Request of an inpatient call 1. The number of bed and room requesting call are displayed as green and yellow wall paper is switched. Call request screen 2. If you pick the handset or press the speaker phone button, the number of bed and room requesting call are displayed. - Page 8 www.safemag.ru 2. Seeing the stand-by call list (in case of offering bed call function) If there’s call request from another bed during the conversation with a patient, stand-by call list will be shown. If you select the stand-by list while talking, previous call will be ended and conversation with selected bed will be started.
- Page 9 www.safemag.ru 3. Outside call(IP-Phone) function(Option function) During the nurses’ absence in the nurse station, call request is delivered by the information of nurse and schedule registered in the server(IP-PBX) to the nurse’s cell phone. Once the nurse get the phone, a main receiver is displayed the number of bed on a screen.
-
Page 10: Staff Call Funtion
www.safemag.ru IV. STAFF CALL function In case that the nurse judges the situation as emergency when the nurse presses the presence switch from patient’s call and visits the bed of the patient, in a bed if you try call request on the screen of main receiver in a nurse station the number of bed and emergency sound will break out. -
Page 11: Emergency Situation Function
www.safemag.ru V. Emergency situation function 1. Emergency situation notice 1. Can check emergency request occurred in a ward or outside lavatory or shower room. 2. If you press the call button once more or pull the emergency switch in the place occurred in the emergency situation, emergency will be cancelled and stand-by screen will appear. - Page 12 www.safemag.ru Outside emergency notice screen * In case of ward of general, lavatory and shower room are marked as same number. In case of outside, room number represents designated number (9997) and lavatory or shower room are marked differently in bed number www.safemag.ru...
-
Page 13: Simultaneous Situation Function
www.safemag.ru VI. Simultaneous situation function (Emergency + Call) 1. Simultaneous situation notice 1. In case of emergency during conversation or incoming call in the middle of emergency, you can check them at the same time. ① ② Simultaneous situation notice screen ①... -
Page 14: Broadcasting Function
www.safemag.ru VII. Broadcasting function 1. Whole broadcasting Able to broadcast for whole rooms in connection with receiver. 1. Pick the handset or deliver a message after pressing the whole broadcasting in speaker mode. Whole broadcasting implementation screen www.safemag.ru... - Page 15 www.safemag.ru 2. Group broadcasting Can broadcast with bed in a group. (Group setting in remote control mode) 1. Pick the handset or press the group broadcasting at the bottom of menu in speaker phone mode. 2. With using the dial button in front or selecting the group to broadcast, press the group number and deliver a message after pressing group number and pound button (#).
-
Page 16: Smart Control Function
www.safemag.ru VIII. Smart control This function is provided in order to register and change the bed phone in the main receiver. Because ID of first released bed phone is identified, each bed phone can be used through remote control. www.safemag.ru... -
Page 17: Searching The Bed
www.safemag.ru 1. Searching/saving the bed It can be registered automatically by exploring the shortcut as appointed numbers. As ID of bed telephone is identical, this function is used after ID change. ④ ① ⑤ ② ③ ① Max bed numbers ④... - Page 18 www.safemag.ru 3. Select the edit box for end room number. Then, enter the highest ward number in a ward. 4. If the three information input is completed, press the start button of exploration and then exploration will be starting. 5. After completed the exploration, press the exit button. Then, in a main screen, each bed’s hot key(shortcut) registered automatically can be checked.
-
Page 19: Designating The Bed Group
www.safemag.ru 2. Designating the bed group Able to set as identical group by selecting the bed to want number group designation of registered bed. ⑤ ① ⑥ ② ③ ④ ⑦ ⑧ ①Bed group filter ⑤Bed group ID selection ②Bed selection button ⑥Bed group change button ③Bed ID (Room no.-Bed no.) ⑦Bed group deletion button... - Page 20 www.safemag.ru Group selection screen 2. After selecting the beds you want to change, press the Bed group ID selection button and select the group number to change. (Group F is default setting number) Bed selection and Bed group ID selection button screen www.safemag.ru...
- Page 21 www.safemag.ru Group Number changing screen 3. After selecting Bed ID and group number to change, press the change button. Then, group number of Bed ID is changed. Group number change progress screen www.safemag.ru...
- Page 22 www.safemag.ru 4. If you press the delete button after selecting Bed ID and group number, group ID of default state is changed to F. www.safemag.ru...
-
Page 23: Deleting The Bed
www.safemag.ru Deleting the bed 1. After selecting the room number of the ward to delete, agreement message of deletion pops up if you press the relevant bed. 2. If you press “Yes”, the relevant bed is deleted. 3. In case of return to main screen, press the Home button of navigation button or (Home) at the right bottom of the screen. -
Page 24: Recent Calls
www.safemag.ru Recent calls Recent calls between user and patient can be checked. It can check the place to send and receive, date and time to start a call, Talk time. ④ ⑤ ③ ① ② ① Incoming calls ④ Dialing time list ②... -
Page 25: Bed Designation In Charge
www.safemag.ru Bed designation in charge This is the function which is connected to smart phone of the nurse in charge during a nurse’s absence in nurse station. This setting is possible to set with smart phone or main receiver. ※ Currently, this can be used the Database must be installed on a IP- PBX server. - Page 26 www.safemag.ru ① Telephone number box ⑤ User employment status button ② Name box ⑥ User creation button ③ Nurse select button ⑦ User Info. Edit button ④ Users list (Red part) ⑧ User Info delete button A. After entering the name and phone number of a nurse, press the create button.
- Page 27 www.safemag.ru 5-2. Time organization ③ ④ ① ② ⑤ ⑥ ⑦ ① Time arrangement list select button ⑤ End time setting button ② Time arrangement list (MAX 4) ⑥ Creation button ③ Profile name box ⑦ Delete button ④ Start time setting button E.
- Page 28 www.safemag.ru Screen of start time setting F. In case of editing the information, if you select the profile to edit in the list, the selected name is shown in the edit box of the profile name. If you set the time with time setting button, the changed contents in the list can be checked.
- Page 29 www.safemag.ru 5-3. Time table ⑤ ① ② ③ ④ ⑥ ⑦ ⑧ ① Previous month change button ⑤ User select button ⑥ Time arrangement list and button ② Present month ⑦ Creation button ③ Next month change button ⑧ Edit button ④...
- Page 30 www.safemag.ru In order to edit the working schedule of user, press the edit button after selecting the user to change in the list(⑤) and then it is completed. Caution) Creation button is needed first once a month at least. Since then, the schedule changes of the relevant month will be edited.
- Page 31 www.safemag.ru 5-4. Majority designation In case that user’s responsible beds are same, you can set it easily through not individual designation but majority designation. ⑥ ② ⑤ ④ ③ ① ⑦ ① Bed select button ⑤ Select all beds button ②...
- Page 32 www.safemag.ru 5-5. Individual designation Able to set the responsible bed of a nurse individually. ① ④ ③ ② ① User select button ③ Whole bed list ② Bed select button ④ Edit button K. After selecting the user to set, choose the bed in charge.
- Page 33 www.safemag.ru 5-6. Call type Able to select call system in order and concurrently of call connection system with responsible nurse’s smart phone. ① ② ③ ⑤ ⑥ ④ ⑦ ⑧ ① Bed name ⑤ Interval set button ② Connection form ⑥...
- Page 34 www.safemag.ru M. It will be set at once with Select all(⑥), Cancel all button(⑦) www.safemag.ru...
- Page 35 www.safemag.ru 5-7. Setting Bed list should be saved in the server so that the user selects the relevant bed with main receiver. Designation in charge for bed function can be used if this process is preceded. ① ② Set screen through main receiver ①...
- Page 36 www.safemag.ru O. In order to saving all bed list connected with the main receiver to the server, press the transmission button(②) and then it will be saved in the server. ① ② ③ Set screen through smart phone ① Enter the number of main ③...
- Page 37 www.safemag.ru B. For the saved bed list in the server, the record of user, loading the time organization history, press the relevant server IP and port number. C. During setting a smart phone, confirmation mark(③) of the main receiver is shown as unchecked. www.safemag.ru...
-
Page 38: Setting The Bed, Group Number
www.safemag.ru IX. Bed, group number setting 1. To set the number Press the remote control in the main screen while talking on the phone and select the number to change. (Bed number, group number) Check the existing number in ③(Before) and correct the number in ④(After) and press ⑤(OK). - Page 39 www.safemag.ru ② ① ③ ④ ⑤ ⑥ < Number setting screen> 2. Reset 1. This is the function to reset the power of bed connected with the main receiver. 2. Press the ⑥ OK button and ‘Yes’ button. Then, you can reset the power of the bed.
-
Page 40: Configuration
www.safemag.ru Chapter 2 . Configuration www.safemag.ru... -
Page 41: Setting The Environment
www.safemag.ru I. Configuration Setting the environment In the mode of environment setting, you can move to stand-by screen and previous screen by pressing (HOME) or (BACK) button on the top of the screen. www.safemag.ru... - Page 42 COMMAX user option Able to change password. Password change You can change the password to off emergency situation and go out mode. Click the password-changing button. If the entering password screen is displayed, click the password box. Then you can use virtual keyboard mode.
- Page 43 COMMAX connection To COMMAX connection, configuration can be set. Do not operate the setting except for installers. In case that right value is not entered, COMMAX connection and management are not operated properly. Server IP setting Able to set local server, SIP server, update, CCTV server,...
- Page 44 www.safemag.ru Press the mute mode. If mute mode is checked, sound setting icon at the bottom is inactivated. And is displayed the task bar on the top of the screen. . If checking of the mute mode is cancelled, the icon of the sound set at the bottom is activated and in the task bar of the top is removed.
- Page 45 www.safemag.ru The list which can restrict the time on the screen is marked. If you press the time to want, the setting is saved. If you press the cancellation button, it is not set. VI. Touch screen correction Press the correction of touch screen. According to the guide of screen, press the cross icon in order.
- Page 46 www.safemag.ru want. If you check the keyboard to use as default keyboard, when entering the text, the relevant keyboard is marked. Check the keyboard to use as a basic keyboard. When entering the text, checked keyboard is marked. Date and time Set the date and time.
- Page 47 www.safemag.ru Designating the 24hours form Check or cancel the 24hours form If checked, the time is marked as 24hours. If cancelled, the time is marked as 12 hours. Press the date form selection. The date form selection window is marked on a screen.
- Page 48 * Diagram Product name : nurse calling device Line item : JNS-70MN Power source : DC24V Max current consumption : 400mA www.safemag.ru...
- Page 49 513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea Int’l Business Dept. Tel. : +82-31-7393-540~550 Fax. : +82-31-745-2133 Web site : www.commax.com Printed In Korea / 2011.12.104 www.safemag.ru...
Need help?
Do you have a question about the JNS-70MN and is the answer not in the manual?
Questions and answers