Rear Axle; Free Wheeling Or Towing; 2-Position Seat Adjustment - Bolens Husky 900 Manual

2-Position Seat
Durable, cushioned seat adds to driver's comfort.
To adjust seat, remove 2 nuts from under tractor
seat and reposition in holes provided. Tool box is
conveniently located under seat.
FREE WHEELING
The pin located on the inside hub of right rear
wheel will permit free wheeling when the tractor
is to be pushed or towed. Pull pin out for "free
wheeling" and push pin in for "drive". When the
right rear wheel pin is in drive it also acts as a
brake even when the gear shift lever is in neutral.
On HUSKY 800 & 900 turn positive drive adjusting
nut (on left rear wheel axle) counter-clockwise as
far as it will go. DO NOT USE WRENCH
16

Rear Axle

After use the rear axle may develop end
play which should be removed.
approximately every 50 hours of operation
and adjust if necessary.
ADJUSTMENT PROCEDURE:
1. Remove retaining ring and hand ad-
justing nut from left end of rear axle.
(Step 1 for HUSKY 800 & 900.)
2. Remove cotter pin securing castle nut at
end of left rear axle, tighten nut finger-
tight (DO NOT USE WRENCH) and re-
place cotter pin.
3. Tighten nut on right rear axle in the
same manner.
IMPORTANT: ALWAYS TIGHTEN NUT ON
LEFT SIDE FIRST. NEVER TIGHTEN NUTS
WITH A WRENCH AS THIS WILL CAUSE
DAMAGE TO THE TRANSMISSION
Check