Connecting The Lanyard To Your Buzzclip - iMerciv BuzzClip Quick Start Manual

Connecting the Lanyard to your BuzzClip

Locate the Lanyard Loop – This is a small hole or loop located along the chamfered
edge of the main body. This hole is to attach the lanyard that is included in your box
for additional safety and security purposes (in case of drops, etc.)
To Attach the Lanyard:
1. Locate the thin rope that is attached to the small plastic adaptor.
2. Thread the thin rope through the lanyard loop.
3. Open the end of the rope that has been threaded through the lanyard loop
and pull the other end of the lanyard all the way through to firmly attach
the lanyard to the device.
4. To detach the lanyard, push the small round button at the center of the
plastic adaptor and pull out the ring on the perimeter of the adaptor.