Holding Your Buzzclip - iMerciv BuzzClip Quick Start Manual

Holding your BuzzClip

Your BuzzClip can be used as both a wearable and a handheld!
Locked Position:
1. Place the device in your hand with the vibrator housing in your palm.
2. Position or slide your thumb under the rounded top and you will be able to
push the sensor up until it locks at a 90-degree angle so that the sensor is
now facing forward rather than up at you.
3. You can now hold the BuzzClip in your hand similarly to how you would
hold a flashlight and use it as a handheld to detect obstacles. We
recommend using the 3-meter mode when holding the BuzzClip.