Advertisement
■ If You are Having Trouble
Condition
Suction box does not
work
Does not adsorb
Suction starts at the
beginning, but it comes
off in a few minutes.
Abnormality in play sound
■ Maintenance/How to Care
● The dustier a sealing rubber of Magnesium disc gets, the less effectively the adsoption operation works.
Follow the operation preparation ④ to clean the sealing rubber. In order to prevent the sealing rubber
from being deteriorated and to maintain smooth slip, application of a commercially available Silicone agent
for rubber is recommended.
● Although life of battery may vary depending on the warpage of a record disc, approximately 200 times of use is
possible. Duration of adsorption is approximately 30 seconds, however, if it begins to stop earlier than it is
supposed to, the battery needs to be replaced. (Because the life of dry battery is short, alkaline battery is
recommended.)
● Take out the battery from the turntable when not be used for a while.
■ Replacement due to Magnesium Disc Aging Deterioration
When disc gets damaged because rubber is deteriorated by on-going use of long years, please return the main
disc with its warranty certificate in to your purchased store and you can change it to new one for exchange price.
Cause
①Power is not correctly set.
②Power is consumed.
③ The back of a record disc and sealing rubber
are dusty.
④ deformation of the sealing rubber
⑤ Big warpage
⑥ The battery of the suction box is consumed.
⑦ The shape of the center spindle and turntable
is inappropriate.
⑧ Operation preparation (page 3 ②) is not
properly done.
⑨ Insufficient suction operation
⑩ Due to the thickness of Magnesium disc,
the record is positioned higher than
it is supposed to be.
Solution
① Please check the polarity (+,-) of the battery and
reinsert it.
② Change the battery
③ Clean the record disc and the sealing rubber
of Magnesium disc thoroughly.
④ Wait for a while for recovery without
loading a record. If still not recovered,
sealing rubber needs to be replaced.
(Please turn in the old one to your distributor.)
⑤ Use the accompanying adsorption adapter
and repeat the suction operation a few times.
⑥ Change the battery.
⑦ Please call your purchased store.
⑧ Insert the hose and tighten the screw.
⑨ Keep sucking the suction box automatically stops.
Or more specifically, use the adsorption adapter to
avoid the warpage of a record disc or repeat the
adsorption operation a few times.
⑩ Adjust the height to make the record and the tonearm
horizontal with each other.
Advertisement
