Advertisement
■ How to Operate
① Set a record disc on the Magnesium disc.
VACUUM DISC MATE IQ1300A is exclusive for a 12 inch.
analog record disc.
② Insert the suction collar in the center spindle and press
the switch on the suction box. Suction operation ends
when operation lamp goes out. (Adsorption is done in
about 30 sec.) In case adsorption is not done well
enough due to the warpage of a record disc, try to
press the switch again or set the suction adapter to
have it fully adsorbed. (The surface being fluffy when
press a record disc means adsorption has not correctly
been done.)
③ After fully adsorbed, remove the suction collar and
play a record.
＊ When it is well-vacuumed, it may be hard to remove
the suction collar. Remove it slowly holding the
collar down.
＊ Adsorption retention time (per one side) is expected
for approx. 40 mins., but it may vary depending on
the state of a record disc. (In case adsorption is
insufficient, use the suction adapter.)
④ When finished playing a record disc and remove the
record, push the tip of the sealing rubber with your
finger to let air in between the record and the disc in
order to release adsorption.
＊ It is dangerous to lift a record disc up while it is
not released yet.
(If a record disc is not sufficiently adsorbed)
Use of adsorption adapter will help adsorption
operation.
Advertisement
