Maintenance; Environmental Protection; Declaration Of Conformity - Worx WX178 Safety And Operating Manual

32°F (0°C) and above 113°F (45°C) as this will affect
performance.
3. THE BIT LOCK
TM
ROTATE.
Pull the trigger and have the drill rotate briefly. The
Bit Lock Switch ring should release and operate as
TM
normal .

MAINTENANCE

Remove the battery pack from the tool before
carrying out any adjustment, servicing or
maintenance.
Your tool requires no additional lubrication or
maintenance.
There are no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean
your power tool. Wipe clean with a dry cloth. Always
store your power tool in a dry place. Keep the motor
ventilation slots clean. Keep all working controls free
of dust. Occasionally you may see sparks through the
ventilation slots. This is normal and will not damage
your power tool.
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be disposed
of with household waste. Please recycle where
facilities exist. Check with your local authorities
or retailer for recycling advice.
Lithium-Ion Cordless Drill/Driver
WX178 WX178.1 WX178.2 WX178.3 WX178.4 WX178.9
SWITCH WILL NOT
DECLARATION OF
CONFORMITY
We,
Positec Power Tools (Europe) Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
Declare that the product,
Description Battery-powered Drill
Type WX178 WX178.1 WX178.2 WX178.3
WX178.4 WX178.9 (1-designation of machin-
ery, representative of Battery-powered Drill)
Function Drilling/Tightening and loosening
screws, nuts
Complies with the following Directives,
2006/42/EC
2011/65/EU
2014/30/EU
Standards conform to
EN 55014-1
EN 55014-2
EN 60745-1
EN 60745-2-1
EN 60745-2-2
The person authorized to compile the technical file,
Name Jim Kirkwood
Address Positec Power Tools (Europe)Ltd,
PO Box 6242, Newbury, RG14 9LT, UK
Suzhou 2017/07/05
Allen Ding
Deputy Chief Engineer,Testing & Certification
13