Technical Data; Noise Information; Vibration Information - Worx WX178 Safety And Operating Manual

1. DRIVE MODE WITH SAFE DRIVE
2. DRILL MODE
3. PULSE ASSIST
4. FORWARD/REVERSE ROTATION SWITCH
5. SOFT GRIP HANDLE
6. BATTERY PACK*
7. BELT HOOK
8. BATTERY PACK RELEASE BUTTON
9. LED LIGHT
10. VARIABLE SPEED SWITCH
11. CHUCK
12. BIT LOCK
TM
13. BIT CLIP
* Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX178 WX178.1 WX178.2 WX178.3
WX178.4 WX178.9 (1-designation of
machinery, representative of Cordless Drill)
10
Charger voltage
Battery capacity
Charging time
Rated voltage
No load speed
Max torque
Chuck capacity
Max.
Steel
drilling
Wood
capacity
Machine weight
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
Lithium-Ion Cordless Drill/Driver
WX178 WX178.1 WX178.2 WX178.3 WX178.4 WX178.9
TM
SWITCH
WX178 WX178.1
WX178.2 WX178.3 WX178.9
WX178.4
100-240V ~50/60Hz
2.0Ah
1hr
20V Max**
0-800/min
20N.m
10mm
10mm
25mm
1.3kg
L : 80.5dB(A)
pA
L : 91.5dB (A)
wA
K & K
PA WA
Wear ear protection when sound
pressure is over

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined
according to EN 60745:
Drilling into metal
Screw driving
without impact
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration emission value during
actual use of the power tool can differ from the
declared value depending on the ways in which the tool
is used dependant on the following examples and other
variations on how the tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and
/
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
/
anti vibration accessories are used.
/
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration
syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of
exposure level in the actual conditions of use
should take account of all parts of the operating cycle
such as the times when the tool is switched off and
when it is running idle but not actually doing the job.
0.93kg
This may significantly reduce the exposure level over
the total working period.
Helping to minimize your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these
instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti
vibration accessories.
Plan your work schedule to spread any high vibration
tool use across a number of days.
3.0dB (A)
80dB(A)
Vibration emission value
a = 2,675m/s²
h,D
Uncertainty K = 1,5m/s²
Vibration emission value
a = 1,831m/s²
h
Uncertainty K = 1,5m/s²