Technical Specifications; Chart 2: Local Power Connector Piout; Chart 3: Technical Specifications - LDA LDAMCA1NS01 User Manual

Ethernet paging microphone
Table of Contents

Advertisement

3.
DIP SWITCH: Select the IP address of the MCA-1N desk microphone by setting the
last 8 bits of the address. The IP address of a MCA-1N microphone will be: 192.168.0.XXX
Where XXX is the number that conrresponds to the 8-bit hexadecimal configuration.
NOTE: The ON position means 0, and the OFF position means 1. The most significant bit
is the switch no1 and switch no8 is the bit with less weight.
4.
LOCAL POWER CONNECTOR: The MCA-1N works with a local power supply of 5V
to be connected to this connector. The connection must follow pinout:

Chart 2: Local power connector piout

5.
Ethernet connector: For connection to the PA server.

4 TECHNICAL SPECIFICATIONS

Model
Power supply
Frecuency response
Output audio
Signal/noise ratio
Sensitivity
Directional axis
Kind of transducer
Dimensions without flexible lamo
Flexible lamp long
Consumption

Chart 3: Technical Specifications

LDA Audio Tech - Severo Ochoa Nº 31- 29590 MÁLAGA, ESPAÑA. Tlf: +34 952028805
GND
o
LDAMCA1NS01
5Vdc, 500mA.
200 – 15000 Hz (+/-2dB)
750mV 600 J balanced
100 dB (A weighting)
-70 dB. At 1KHz
Axial with hipercardiod polar diagram
response.
Dynamic with moving coil.
131 x 60 x 173 mm (WxHxL)
250 mm
2,5W
USER'S MANUAL – MCA1NS01
5V
o
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ldamca1tn

Table of Contents