Table of Contents
Advertisement
able to set the timer between 0-12 hours by pressing on the
increase time) or
i.
The time will be added or subtracted by one hour with every press,
when you press the
than two seconds.
ii.
You can reset the time by pressing the
starts flickering, then press the
you set will take effect.
b. By pressing the
show and the LED light will start flickering (It takes five seconds for it to
go to the default standby mode) at this time you will be able to set the
temperature anywhere between 41
increase the temperature) or
i. The temperature will be add or subtract 1
you press the
seconds.
ii. You can reset the temperature by pressing the
press the
NOTE: If there is no response to the keys after five seconds, or other keys are
pressed, except the
temperature being set right away.
c.
After turning on the machine, the temperature function will be
activated within ten seconds. After ten seconds, if the temperature is
above the set temperature (+ 5
and the heating power wattage will not be displayed. The fan will turn
off after ten seconds (if previously turned on), then display the set
temperature. If the temperature is below the set temperature (-5
the space heater and fan will restart (if the fan is already running, then
within the ten seconds delay time, the fan will continue to work), and
the heating power wattage will be displayed.
13
(to decrease time).
or
key twice, the temperature indicator
or
key, and the press length is more than two
or
key and to set the timer.
,
, or
keys, the digital tube will display the
o
A Name You Can Trust
key, and the press length is more
key once and the timer
or
key and the timer that
o
o
F - 95
F by pressing the
(to decrease the temperature).
o
F with every press when
F), the space heater will be turned off
(to
key will
(to
key twice, then
o
F),
Advertisement
Table of Contents
