Advertisement
2. DMX 2channel
channel
DMX value
ch1
0 – 255
0– 6
7 – 13
14 – 20
21 – 27
28 – 34
35 – 41
42 – 48
49 – 55
56 – 62
63 – 69
70 – 76
77 – 83
84 – 90
91 – 97
98 – 104
105 – 111
112 – 118
119 – 125
ch2
126 – 132
133 – 139
140 – 146
147 – 153
154 – 160
161 – 167
168 – 174
175 – 181
182 – 188
189 – 195
196 – 202
203 – 209
210 – 216
217 – 223
224 – 230
231 – 237
238 – 244
245 – 255
3. DMX 5channel
channel
DMX value
ch1
0-255
ch2
0-255
ch3
0-255
ch4
0-255
ch5
0-255
7
Stage Par Mini
fuction
brightness
LEDs off
colour 1
colour 2
colour 3
colour 4
colour 5
colour 6
colour 7
colour 8
colour 9
colour 10
colour 11
colour 12
colour 13
colour 14
colour 15
colour 16
colour 17
colour 18
colour 19
colour 20
colour 21
colour 22
colour 23
colour 24
colour 25
colour 26
colour 27
colour 28
colour 29
colour 30
colour 31
colour 32
colour 33
colour 34
colour 35
Functon
Dimmer
Red (0%--100%)
Green (0%--100%)
Blue (0%--100%)
White (0%--100%)
Mode - In this menu,you can select your desired mode,including Master,Slave and dAH.
1. Tap the MENU button and UP button or DOWN button until "Mode" is displayed, then press ENTER.
2. You will see three options-Master,Slave and dAH.Then press UP or DOWN to select them.
1)select Master,then press Enter."yes" or "no" will be show.Select "yes" to open the Master mode and select
"no" to close the Master mode.
2)select Slave,then press Enter to confirm the slave mode.
3)select dAH,then press Enter.Channel, address or signal will be show.
①select channel,then press Enter to select your desired channel mode-ch 1,ch 2,ch 5,ch 6 and ch 8,by
pressing UP and DOWN.
②select address,then press Enter to select your desired DMX address from 1 to 512 by pressing UP and
DOWN.
③select signal,then press Enter to open or close the signal by selecting "on" or "oFF".
Allc - This menu will let you control the brightness of the lamp
1. Press the UP or DOWN button until "Allc" is dispalyed, then press ENTER.
2. "x" will be displayed, "x" represents the displayed brightness.Press the UP or DOWN buttons to find your
desired brightness.
Stat- In this menu, you can select your desired static color mode and strobe mode
1. Press the MENU button and UP button or DOWN button until "Stat" is showed, then press ENTER.
2. There will be five options. Press ENTER to select the option and then press UP or DOWN button to select
the value you desire as below.
1) red~R000~R255
2) gree~G000~G255
3) blue~B000~B255
4) uhie~U000~U255
5)st~St 00~St 30
Set – In this menu,you can adjust the value of the system of the light.
1.Tap the MENU button and UP button or DOWN button until "Set" is displayed, then press ENTER.
2."reset", "test" or "LED" will be showed.
1)select "reset",then press Enter.All the value of system will be reset.
2)select "test",then press Enter to test the function of the light,including the static color and the brightness of
the light.
3)select "LED" then press Enter."on","30","60","90" or "120" will be showed.
"on" means the displayer will open all the time.
"30","60","90" and "120" means the displayer will close after "30","60","90" and "120" seconds without any
operation.
Info – you can learn the information of the light.
1.Tap the MENU button and UP button or DOWN button until "Info" is displayed, then press ENTER.
2."Temp" or "Ver" will be showed.
"Temp" represents the working temperature of the light.
"Ver" represents the version of the software.
Stage Par Mini
4
Advertisement
