Download Print this page

Cable Connectors; Button Function - GEMAR Lumitec IRIDIUM Stage Par Mini Manual

7x8w 4in1 rgbw

Advertisement

CABLECONNECTORS
Cabling must have a male XLR connector on one end and a female XLR
connector on the other end.
CAUTION Do not allow contact between the common and the fixture's chassis ground. Grounding the
common can cause a ground loop, and your fixture may perform erratically. Test cables with an ohm
meter to verify correct polarity and to make sure the pins are not grounded or shorted to the shield or
each other.
BUTTON
FUNCTION
MENU
Exits from the current menu or function
Navigates upwards through the menu list and
UP
increases the numeric value when in a function
Navigates downwards through the menu list and
DOWN
increases the numeric value when in a function
Enables the currently displayed menu or sets the
ENTER
currently selected value in to the selected function
9
Stage Par Mini
Features
● RGBW Color Mixing
● Color Strobe Effect
● Color Mix Effect
● LED Chases (Adjustable Speeds)
● Electronic Dimming 0-100%
● DMX-512 protocol
● Five DMX Modes
● 3 Operating Modes - Sound Active, Maser slave Mode, or DMX Control
● DMX-512 Protocol Compatible (1, 2, 5, 6 & 8 DMX Channels)
● Digital Display for Address and Function Setting
Model
● Voltage: 100V~240V,50Hz~60Hz
● LEDs: 7 × 8-W-RGBW-LEDs
● Weight: 2,1 kg
● Dimensions: 145 ×145 × 190mm
● Colors: RGBW Color Mixing
● DMX Channels: 1, 2, 5, 6 & 8 DMX Channel Modes
Stage Par Mini
2

Advertisement

loading

This manual is also suitable for:

1091