C-Data HF200-3613 series User Manual page 8

 Device model
 Device serial number
 Software version
 MAC address (show console login/password when NE2 is configured
7.3 Working Parameters
Show optical transmitter working parameter list, and mark normal or not
("normal", "too high", "too low"). Including:
 Optical power
 Laser temperature
 Laser drive level
 Laser bias current
 Laser constant temperature current
 Power voltage
Attention: When key switch is not turned off, part of parameters will not be
displayed, "Please turn on the key switch" will show up
7.4 Working Status Configuration
Following parameters are configurable:
 Gain control method: AGC (automatic) or MGC (manual)
 Buzzer turn on/off: Buzzer is on after factory, once error occurs on device,
sound will be made to alarm. This function can turn on/off the buzzer. Once
turned off, before being turned on again manually, it will not make any
sound alarm when error occurs.
 Configuration of above functions will be saved automatically, it will not
disappear when power off.
Attention: When key switch is not turned off, this function is not valid, "Please
turn on the key switch" will show up
7.5 Alarm Threshold Information
User's manual