Advertisement
MODES OF OPERATION
SLEEP FUNCTION SETTINGS
Pressing the SLEEP button will illuminate the
arrow next to the SLEEP sign on the LCD screen
and set the SLEEP function on. Pressing it once
more will cancel the SLEEP mode. SLEEP mode
can be set while running COOL or HEAT Modes.
Sleep mode adjusts the set temperature to cope
with the body's natural temperature changes
during sleep for comfortable night temperatures.
If the SLEEP mode is activated, while the system is running in COOL mode, the set temperature
will be automatically increased by 2°F within 1 hour and by 4°F within 2 hours. Similarly, if the
SLEEP mode is activated, while the system is running in HEAT mode, the set temperature will
be automatically decreased by 2°F within 1 hour and by 4°F within 2 hours. SLEEP mode will
turn the system OFF automatically after 10 hours of running in sleep mode.
FAN MOTOR SPEED SETTINGS
Pressing the FAN button will change the fan
motor's speed to provide different amount of air
flow, while the system is running Cool, Heat, Feel
or Fan Only Modes. The arrow next to either
AUTO, HIGH, MED, LOW on the LCD screen
will illuminate to correspond with the currently
set fan speed.
Higher fan speed will cause slightly higher noise.
AUTO speed is automatically controlled
depending on the current conditions.
SYSTEM PROTECTIONS
Any time the system is stopped, it will not restart until after a 3 minute safety time delay is
elapsed. Same time delay is also automatically activated after Mode Changes.
Additionally, the system is protected from damage, under certain extreme running conditions as
listed below. If any of these conditions is reached, the protective devices will stop the system.
Set "OFF" Time
(Press TIMER Button
WHILE THE SYSTEM IS ON)
Time Adjustment
(UP: Longer, DOWN: Shorter)
Set Fan Speed
(Press FAN Button)
Fan Speed Adjustment
(Low, Med, High, Auto)
9
Advertisement
