Advertisement
MODES OF OPERATION
TIMER "OFF" SETTINGS
To set the system to automatically stop, after a
certain time elapses (between 1/2 hour to 24
hours), press the TIMER button WHILE THE
SYSTEM IS IN ON MODE. System will run with
current setting and turn itself OFF automatically
after the set time elapses.
To cancel OFF timer, press TIMER button again.
In case of power failure timer settings cancel out.
FAN ONLY (VENTILATION) MODE
Pressing the MODE button until the arrow next
to the FAN sign on the LCD screen illuminates,
will set the system function to FAN ONLY
(Ventilation) mode.
In FAN mode outdoor unit is entirely deactivated
and only the indoor unit's fan runs without any
cooling or heating effect. Temperature
adjustment button is also deactivated. However,
fan speed can still be adjusted as desired.
DRY (DEHUMIDIFICATION) MODE
Pressing the MODE button until the arrow next
to the DRY sign on the LCD screen illuminates,
will set the system function to DRY
(Dehumidification) mode.
In DRY mode, system operates based on its
internally programmed software instructions and
temperature setting and the fan speed buttons
are deactivated. Entire DRY operation is
automatically controlled.
FEEL (AUTO CONTROL) MODE
Pressing the MODE button until the arrow next
to the FEEL sign on the LCD screen illuminates,
will set to system function to FEEL (Auto Control
based on below pre-programmed instructions)
mode. Temperature setting button is inactivated.
Set "OFF" Time
(Press TIMER Button
WHILE THE SYSTEM IS ON)
Time Adjustment
(UP: Longer, DOWN: Shorter)
Set FAN Mode
(Press MODE Button)
Temperature Adjustment
(Not Available in FAN Mode)
Set FAN Mode
(Press MODE Button)
Temperature Adjustment
(Not Available in FAN Mode)
Set FEEL Mode
(Press MODE Button)
Temperature Adjustment
(Not Available in FEEL Mode)
8
Advertisement
