Get Started; Install Battery; Connect Power; Set Clock - Philips AJT4400B/37 User Manual

3 Get started

Always follow the instructions in this chapter in
sequence.

Install battery

Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or fire. Never discard batteries in fire.
•
Danger of explosion if batteries are incorrectly
replaced. Replace only with the same or equivalent
type.
•
The batteries contain chemical substances, so they
should be disposed of properly.
You can only use AC power as power supply.
The battery can only back up clock and alarm
settings.
• Install two AA batteries (not supplied) as
illustrated below:

Connect power

Caution
•
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio.
•
Risk of electric shock! When you unplug the AC plug,
always pull the plug from the socket. Never pull the
cord.
EN
6

Set clock

1
Press SET TIME/ 12/24 HR to activate
clock setting mode.
» The hour and minute digits blink.
2
Press + TUNING/ HR - to set hour.
3
Press + PRESET/ MIN - to set minute.
4
Press SET TIME/12/24 HR to confirm.
5
Press and hold SET TIME /12/24 HR to
select 12/24 hour format.