Related Manuals for Zhejiang Dahua Security Technology Dahua HD Mini
Summary of Contents for Zhejiang Dahua Security Technology Dahua HD Mini
- Page 1 Dahua HD Mini Network Dome Camera Quick Start Guide Version 1.0.1 Zhejiang Dahua Vision Technology Co., LTD...
-
Page 2: Network Camera
Welcome Thank you for purchasing our network cameras. This user’s manual is designed to be a reference tool for using your product. Please read the following safeguards and warnings carefully before you use this series product. Please keep this user’s manual well for future reference. Important Safeguards and Warnings Electrical safety ... - Page 3 Operation and Daily Maintenance Do not directly touch the heat dissipation component of the device to avoid scald. Do not dismantle the device because there is no component that can be fixed by users themselves. Otherwise, it might cause water leakage or bad image due to unprofessional dismantling.
-
Page 4: Regulatory Information
Do not provide two or more power supply sources for the device; otherwise it might damage the device. Disclaimer This manual is for reference only. Please refer to the actual product for more details. Minor differences might be found in user interface, and there might be deviation between the actual value of some data and the value provided in the manual due to the reasons such as the real environment is not stable. - Page 5 Note Please refer to the disk for more details, check and download the corresponding user’s manual and tool. Before installation, please open the package and check all the components are included. Contact your local retailer as soon as possible if something is broken in your package. Accessory Name Amount Accessory Name...
-
Page 6: Table Of Contents
Table of Contents Device Structure ....................... 6 Components ......................6 Dimensions ......................7 Installation ......................... 8 Install SD Card (Optional) ................. 8 Fix Device ......................8 Connect Device Cable ..................9 Adjust Device Angle ..................10 Network Configuration ....................12 Device Initialization .................. -
Page 7: Device Structure
1 Device Structure 1.1 Components Note The following figures are for reference only, which are used to know the device component and cable port function. Device component and cable port function may differ according to different models, please refer to the actual devices for details. -
Page 8: Dimensions
Port Port name Function MIC hole Audio input Connect to DC 12V power, input power. Please be sure to power the device according to the instruction of device label. Power input port Caution It may cause damage to the device if it fails to power the device according to the instruction of device label. -
Page 9: Installation
2 Installation 2.1 Install SD Card (Optional) Note Please implement this step when it needs to use SD card and there is a SD card slot for the device. Please cut off the device power before installing SD card. Step 1 Use wrench to loosen the screws on the dome enclosure and then open the dome cover. -
Page 10: Connect Device Cable
Figure 2-2 Step1 Take out the installation position map and stick it on the mounting surface according to the monitoring area. Step 2 Mark and dig bottom holes of plastic expansion bolts on the mounting surface, insert the expansion bolts into the mounting holes and lock them firmly. Note Please dig a “cable exit hole”... -
Page 11: Adjust Device Angle
It needs to implement the operation when the device is equipped with waterproof connector and it is used outdoors. Figure 2-3 Step 1 Keep the convex groove outward and install the rubber ring into the network port, keep the smaller hole of the rubber ring outward and install the fixing rubber ring into the main body of the waterproof connector. - Page 12 Figure 2-4 Hold the dome cover, align it with the cable exit location and make the cover back in position. Then use inner hex wrench to fasten three inner hex locking screws to complete installation.
-
Page 13: Network Configuration
3 Network Configuration You can initialize the device and modify IP address via "Quick Configuration Tool"; you can also initialize device and modify IP address on the WEB interface. It needs to connect to wired network to configure wireless parameters before using Wi-Fi camera. Please refer to the WEB Operation Manual in the disk for more details. -
Page 14: Modify Ip Address
Figure 3-1 Step 5 Set new password and confirm password, select Email Address and input email address. Note The password can be set as 8 to 32 characters; it can be a combination of number(s), letter(s) and symbol(s) with at least two kinds of them (excluding “'”,“"”,“;”,“:”,“&”). Please set password with high security according to the password strong and weak prompt. -
Page 15: Login Web Interface
Step 4 Select the devices whose IP addresses need to be modified, and then click The system will display the dialog box of Modify IP Address, which is shown in Figure 3-2. Figure 3-2 Step 5 Set the mode as Static, and enter the planned start IP, subnet mask and gateway. Note Set the mode as DHCP when there is DHCP server in the network, the device will automatically acquire IP address from the DHCP server. - Page 16 Figure 3-3 Zhejiang Dahua Vision Technology Co., Ltd Address：No.1199 Bin’an Road, Binjiang District, Hangzhou, PRC. Postcode: 310053 Tel: +86-571-87688883 Fax: +86-571-87688815 Email:overseas@dahuatech.com Website: www.dahuasecurity.com...
Need help?
Do you have a question about the Dahua HD Mini and is the answer not in the manual?
Questions and answers