Download  Print this page

Mitsubishi Electric KSGD-01W Installation Manual

K-con series semi conductor standalone refrigerant leak detector.
Hide thumbs
   

Advertisement

KSGD-01W/S SEMI CONDUCTOR STAND ALONE
REFRIGERANT LEAK DETECTOR
Installation Manual
Instructions for :-
KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector
For safe and correct use please read the installation manuals supplied with the equipment.
Manufactured on behalf of
MITSUBISHI ELECTRIC UK
   
Issue 1

Advertisement

Table of Contents

   Related Manuals for Mitsubishi Electric KSGD-01W

No related manuals

   Summary of Contents for Mitsubishi Electric KSGD-01W

  • Page 1 KSGD-01W/S SEMI CONDUCTOR STAND ALONE REFRIGERANT LEAK DETECTOR Installation Manual Instructions for :- KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector For safe and correct use please read the installation manuals supplied with the equipment. Manufactured on behalf of MITSUBISHI ELECTRIC UK...
  • Page 2 KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector Contents Page 3 - 4 Safety precautions General Detail / Features Installation Instructions / Internal View / Wiring Operation / Technical Specification / Operation Matrix 2 ...
  • Page 3 If the pressure switch, thermal switch, or other protection device is shorted or operated forcibly, or parts other than those specified by Mitsubishi Electric are used, fire or explosion may result. To dispose of this product, consult your dealer. Do not use a leak detection additive.
  • Page 4 Warning: Mitsubishi Electric UK assumes no liability for damages consequent to the user of this product. We reserve the right to change this manual at any time without notice. The information furnished by us is believed to be accurate and reliable. However, no responsibility is assumed by us for its use, nor for any infringements of patents or other rights of third parties resulting from its use.
  • Page 5 KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector General KSGD-01 STAND ALONE (SEMI-CONDUCTOR) The detector is a microprocessor based refrigerant leak detector for air conditioning systems designed primarily for use in offices, and residential properties. Not recommended for use in hotel or bedroom applications when connected and used in conjunction with pump down system.
  • Page 6 KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector Installation Instructions Wiring sensor to fan coil using the supplied 5-wire adapter (PAC-SA88HA) if operated with VRF system pump down. (Example shown for 1000ppm see Aspirated KS8-IR8/16C Infra-Red Aspirated Refrigerant Gas Detector and VRF Refrigerant Pump Down Package manuals for detail) Pins ...
  • Page 7 KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector Operation When the power supply is applied, a green LED will flash to indicate power “ON.” After approximately 5 minutes, the green LED will be illuminated permanently and the detector is operational. At alarm the LED will flash red/amber, the buzzer will start and the relay will change status.
  • Page 8 Please be sure to put the contact address/telephone number on this manual before handing it to the customer. MITSUBISHI ELECTRIC UK MITSUBISHI ELECTRIC UK, TRAVELLERS LANE, HATFIELD, HERTFORDSHIRE, AL10 8XB 8 ...

This manual is also suitable for:

Ksgd-01s

Comments to this Manuals

Symbols: 0
Latest comments: