Advertisement
Installation Instructions
Wiring sensor to fan coil using the supplied 5-wire adapter (PAC-SA88HA) if operated with VRF system pump down.
(Example shown for 1000ppm see Aspirated KS8-IR8/16C Infra-Red Aspirated Refrigerant Gas Detector and VRF Refrigerant Pump
Down Package manuals for detail)
Stand alone power supply required
12VDC KSTR12
KSGD-01W/S Semi Conductor Standalone Refrigerant Leak Detector
Pins
1 2 3 4 5
Cable can be extended to a max of 10 metres.
6
Note:
Please see Operation Matrix table in Aspirated
KS8-IR8/16C Infra-Red Aspirated Refrigerant
Gas Detector and VRF Refrigerant Pump
Down Package manuals for detail
Typical connections used 3 & 4
5 wire adaptor PAC‐SA88HA to be only used in
conjunc on with VRF pump down system
Advertisement
