Action S002102 Instruction Manual page 9

Assembly Instructions (cont)
Step 2
Nest Swing Assembly
Insert the Metal Tube (41) into the fabric of the Nest Swing (13). Join the metal tubes together and
then fasten them by using the bolt at the end of the Rope (43). (See above).
Repeat this for the other side, and then the Nest Swing becomes two semicircles (See below).
13
Semicircle
Press
9
13
Press Press
41
41
Press
41
Semicircle
Lay the two semicircles on the ground,
join the two part tubes together, and
then press it down so that two parts are
joined together as a circle.
13
43
43
43
Finished
S002102 6 Station Swing Set