Related Manuals for Unwin Combined Webbing Tie-down with 2 & 3 point Occupant Restraint
Summary of Contents for Unwin Combined Webbing Tie-down with 2 & 3 point Occupant Restraint
- Page 1 Combined Webbing Tie-down with 2 &3 point Occupant Restraint Unwin User Manual Instructions for fitting and use...
- Page 2 Keep the manual in a safe place so that you can refer to it when necessary. If you have any questions about your equipment, please contact Unwin. Once again, thank you for placing your confidence in our products!
- Page 3 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Safety information Limitations of use General guidance Before installing and using the combined webbing tie-downs with 2 & 3 point occupant restraints Fit and use 10-17 Fitting &...
-
Page 4: Safety Information
Wheelchair & occupant restraint Safety information Limitation of use The development of Unwin wheelchair combined wheelchair & occupant restraints is a continuous process. Applications are added on a regular basis. For more detail contact Unwin or look on the Unwin website. - Page 5 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Combined webbing tie-down with 3 point occupant restraint...
-
Page 6: General Guidance
Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint General guidance • Wheelchair Accessories that have not been approved by the Wheelchair Manufacturer must be removed from the wheelchair and secured in the vehicle during transport to reduce the potential for injury. - Page 7 The equipment has been tested in a configuration similar to that recommended by Unwin, and any deviation from the recommendations here is the responsibility of the installer/user. These instructions refer use with both Unwin rails and Solo anchors, however the equipment may be used with any Unwin proprietary rail product.
- Page 8 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Before installing and using the combined wheelchair & occupant restraint • Ensure that the wheelchair is correctly maintained and that the settings of any adjustable parts are made according to ‘Instructions for Use in Transport’.
- Page 9 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints • Wheelchair users, their carers and family are advised to check vehicle specifications to ensure that sufficient floor space is available to accommodate the wheelchair and tie-down system. These distances are based upon the desire to maintain clear zones for potential head excursions of occupants provided with both upper and lower torso restraints.
- Page 10 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Fit and use Fitting and using the combined webbing tie-downs with 2 & 3 point double inertia Rail floor Wheelchair Tie-down: The rail will have been installed in the vehicle in accordance Pull the webbing through the over-centre buckle with their own and the vehicle converter’s instruction.
- Page 11 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Figure 3 Figure 1 Figure 2 Figure 6 Figure 4 Figure 5...
- Page 12 • Unwin recommends the use of a 3 point occupant restraint system to provide greater protection in case of an impact. However we also recognise that some vehicle layout/designs or specific postural or medical conditions do not allow that style of seatbelts to be used easily.
- Page 13 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Figure 10 Figure 8 Figure 9 Figure 7...
- Page 14 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Fit and use Fitting and using the combined webbing tie-downs 2 & 3 point double inertia 2 point double inertia seatbelt Ensure the Comfort Clip is released (Fig 12) and press the buckle to release the lap belt. Removing occupant restraint: Pull the metal tongue on the black webbing upwards to release the webbing from both Release the Comfort Clip.
- Page 15 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Figure 13 Figure 7 Figure 11 Figure 12...
- Page 16 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Fit and use Fitting and using the combined webbing tie-downs with 2 & 3 point double inertia Solo anchor Wheelchair Tie-down: Removing wheelchair tie-down he Solo anchors will have been installed in the vehicle, in accordance with our own and the vehicle converters instructions.
- Page 17 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Figure 15 Figure 1 Figure 2 Indent Figure 6 Protrusion Figure 14 Figure 5 Figure 4...
- Page 18 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Fit and use Fitting and using the combined webbing tie-downs with 3 point static occupant restraint Floor anchors 3 Point Static Occupant Restraint: Disconnect the shoulder belt snap clip from its storage position, The wheelchair tie-down should first be fitted as indicated on (Fig 19), and draw across the upper body connecting it into the page 16.
- Page 19 Wheelchair & occupant restraint Combined webbing tie-downs & 3 point seatbelt systems Figure 17 Figure 18 Figure 19 Figure 16 Figure 20 Figure 7 Figure 21...
- Page 20 Combined webbing tie-downs with 2 & 3 point occupant restraints Wheelchair & occupant restraint Fit and use Fitting and using the combined webbing tie-down & 3 point WAV retractable occupant restraint Floor anchors 3 Point WAV Retractable Occupant Restraint: The wheelchair tie-down should first be fitted as indicated on Adjust the drop link position at or above the shoulder height to page 16.
- Page 21 Wheelchair & occupant restraint Combined webbing tie-downs with 2 & 3 point occupant restraints Retractable occupant restraint 3rd point anchorage Pillar loop cover Drop link buckle Fixed tongue Drop link adjuster Plastic 3 bar slide 15mm stepped Running tongue Drop link tongue Bolt cap Flat washer Weavy washer...
-
Page 22: Warranty
Unwin products when used in conjunction with such jointly tested systems. For further details on specific applications please contact the Sales Office. In other situations, using Unwin products, for which Unwin has not participated in a joint test program, a limited Unwin warranty will apply. -
Page 23: Declaration Of Conformity
Accredited by URS as testing laboratory in accordance with ISO/IEC 17025:2005 Quality system certified in accordance with ISO 9001:2008 Illustrations, descriptions and specifications in the user manual are based on current product information. Unwin reserves the right to make alterations without previous notice. © 2017 Unwin... - Page 24 UNWIN Unwin House The Horseshoe Coat Road Martock, Somerset, UK Phone: +44 1935 827740 E-mail: sales@unwinsafety.com...
Need help?
Do you have a question about the Combined Webbing Tie-down with 2 & 3 point Occupant Restraint and is the answer not in the manual?
Questions and answers